JVC XV-LTR1 manual Troubleshooting, Symptom Possible case Remedy

Page 45

Additional information

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.

Symptom

Possible case

Remedy

 

 

 

Power does not come on.

Power plug is not inserted securely.

Plug in securely.

 

 

 

 

Too far from the unit.

More closer to the unit.

 

 

 

 

The tip of the remote unit is not pointed in

Point the infrared light- emitting window

Remote control does not work.

the right direction.

toward the remote sensor on the front panel.

 

 

Batteries are exhausted.

Replace the batteries with new ones.

 

 

 

 

 

Battery polarity is incorrect.

Take out the batteries and insert them again in

 

the correct direction.

 

 

 

 

 

 

Connection of video cable is incorrect.

Connect the cable correctly.

No picture is displayed on the

 

 

Input selection of TV is incorrect.

Select correctly.

monitor.

 

 

 

Disc is not playable.

Use a playable disc. (See page 12.)

 

 

 

No picture is displayed on the

 

 

monitor when using the

Jack(s) at use is (are) not active.

Make them active. (See page 14.)

COMPONENT or S-VIDEO output

 

 

jack(s).

 

 

 

 

 

Picture is noisy.

The unit is connected to a VCR directly

Connect the unit so that the picture signal

and the copyguard function is activated.

flows directly to the TV.

 

 

 

 

No audio is reproduced.

Connection is incorrect.

Check the connections.

 

 

Input selection of amplifier is incorrect.

Select correctly.

 

 

 

 

No audio is reproduced when

The audio signal is not derived from the

Use the AUDIO OUT when playing back such

playing back a DVD disc recorded

unit's DIGITAL OUT.

discs.

with 96 kHz, linear PCM audio.

 

 

 

 

 

Sound is distorted or noise is

Disc is dirty.

Wipe the disc surface.

generated.

 

 

 

 

 

Picture does not fit the television

MONITOR TYPE is not correctly set.

Select monitor type correctly. (See page 38.)

 

 

screen.

Television is not correctly set.

Set the television correctly.

 

 

 

 

 

Microcomputer malfunction due to

Turn off the power and unplug the power

 

lightning or static electricity.

cord, then connect the power cord again.

Operation is not possible.

 

 

Moisture condensation caused by a

Turn off the power, then turn it on a few hours

 

 

sudden change of temperature or

 

later.

 

humidity.

 

 

 

 

 

Additional

information

 

 

43

Page 44 Page 46
Image 45
Page 44 Page 46
Contents 99,23/$5 Mises en garde, précautions et indications diverses Table of Contents Features Supplied accessoriesIntroduction Random Important cautions Safety precautionsPreliminary knowledge Names of parts and controlsFront panel Remote control unit Infrared signal-emitting window Play Mode button 23, 27, 28$ Cancel button 3D Phonic buttonRear panel Display windowOn-screen displays Operational PrinciplesOpening displays Preference displaysPlay mode displays To prevent the monitor from burning out Screen SaverStatus displays On-screen guide icons How to use numeric buttonsAbout invalid operation icon To select a track/title numberPlayable disc types About discsDisc structure Playable discsConnections Getting startedBefore making any connections To connect to a TVHow to make the Component Video OUT jacks active To connect to a TV with the component video input jacksConnect Y to Y, PB to PB, PR to PR correctly To connect to audio equipment with a digital input To connect to an audio amplifier or receiverTo connect the power cord To install batteries in the remote control unitPrecautions for the safe use of batteries Precaution+10 Remote sensorTurning on/off the unit Basic operationsInserting and removing discs Press 0 OPEN/CLOSE to close the disc trayTo start playback Basic playbackTo stop playback completely To stop playback temporarilyTo locate the beginning of the scene or song Resuming playbackTo memorize the interrupted position To resume playbackTo locate a desired scene from the DVD menu Advanced operationsPress Title or Menu Use the numeric buttons to select the desired itemSee page 11 for details about how to use Numeric buttons Use the numeric buttons to specify the number¶ For DVD VIDEO/Audio CD During playback or while stopped Press Play Mode Press EnterUse Cursor 2/3 to move to Time SEARCH, then press Enter To locate a desired scene from the display Digest When you make a mistakeUse the numeric buttons 0 to 9 to enter the time Press DigestSpecial picture playback Use Cursor 5/∞/2/3 to select the desired scenePress and hold 8 for more than 1 second To zoom a scene Zoom To playback in slow-motion SlowPress Zoom Press 8, then use 1/¡Changing the playback order To playback in the desired order ProgramPress 3 to start program play To playback in random order Random Repeat playbackTo repeat the current selection or all tracks Repeat Use Cursor 2/3 to move to RandomTo repeat a desired part A-B Repeat Mode is selected, you cannot move To A-BAudio CD/Video CD To quit repeat playbackPress Angle To select a scene angle from the normal screen AngleUse Angle or Cursor 2/3 to select the desired angle To quit A-B repeat playbackTo select the subtitle language Subtitle Changing the language and soundPress Audio To change the audio language or sound AudioUse Audio or Cursor 2/3 to select the desired audio For Video CDEnjoying virtual surround sound Selecting the picture characterTo select the picture character To simulate surround sound 3D PhonicTo check the disc/time information Checking the statusDisc/time display appears on the TV screen To turn off the disc/time display Press DisplayTo check the DVD function status To dim the brightness of the display windowDimming brightness of the display window Press DisplayHow to set preferences Initial settingsSelecting preferences LanguageAudio Display Limiting playback by children Remote control unitTo set Parental Lock for the first time System Enter your 4-digit password using the numeric buttons 0 to To change the settings Press Enter while holding down 7 on the remote control unit Screen display appearsButtons 0 to Use the Cursor 5/ ∞ to move To YES Then press EnterCare and handling of discs Additional informationSymptom Possible case Remedy TroubleshootingAppendix ATable of languages and their abbreviations SpecificationsAppendix BCountry code list for Parental Lock Authorized Service Centers Limited Warranty JVC 0701AOMDTEJSC
Top Page Image Contents