JVC XV-LTR1 manual Display

Initial settings

NOTES

• The unit does not provide the DTS decoding function.

• When playing a DVD VIDEO or Audio CD disc with DTS,

use a DTS decoder to get correct signals from your

speakers. Never use the unit's analog output jacks,

which output incorrect signals that may damage your

speakers.

• If you connect the analog outputs and digital outputs

simultaneously, be sure to select the source of the

NOTES

•The Compression function works only when playing back a disc recorded with DOLBY DIGITAL 1CH or 2CH. The setting is not effective for other discs.

•The Compression function does not work when the 3D PHONIC function is activated.

amplifier correctly, or set the level control of the

amplifier connected to the analog outputs to minimum.

DOWN MIX
To playback a DVD VIDEO
disc recorded with surround	LANGUAGE		AUDIO	DISPLAY SYSTEM
multichannel audio	DIGITAL AUDIO OUTPUT				STREAM / PCM
	DOWN MIX					Lo / Ro
correctly, the DOWN MIX	COMPRESSION					ON
setting must be properly
						EXIT
made according to your		PRESS	KEY
audio system.

DISPLAY page

MONITOR TYPE

You can select the monitor type to match your TV when you playback DVD VIDEO discs recorded for wide screen televisions.

LANGUAGE	AUDIO	DISPLAY	SYSTEM
MONITOR TYPE		4:3 LB
SCREEN SAVER		MODE 2
ON SCREEN GUIDE			ON
			EXIT
PRESS	KEY

Initial settings

Note that this setting affects the output signal from the AUDIO (both DIGITAL and ANALOG) output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.

•Lt/Rt

When you enjoy multichannel surround audio by connecting the unit’s AUDIO output (normally, the DIGITAL output) to a surround decoder.

•L0/R0

When you enjoy conventional 2-channel stereo audio by connecting the unit’s AUDIO output to a stereo amplifier/receiver or television set, or when you duplicate audio of a DVD VIDEO disc recorded with surround audio to your MD, cassette, etc.

NOTES

•The Down mix function does not work when the 3D PHONIC function is activated.

•The DOWN MIX setting does not affect an MPEG or Dolby Digital bitstream signal from DIGITAL OUT.

To enjoy the DOWN MIX effect from DIGITAL OUT when playing back a disc recorded with the MPEG Multichannel or Dolby Digital format, set “DIGITAL AUDIO OUTPUT” to “PCM ONLY” (see page 37).

•When playing back a disc recorded with DTS, you cannot get the DOWN MIX effect from both DIGITAL and ANALOG outputs.

• 4:3 LB. (Letter Box Conversion)

When you connect a normal TV to the unit.

When you play a wide picture recorded on a DVD VIDEO disc, the picture is displayed with bands across the upper and lower portions of the screen.

•4:3 PS. (Pan Scan Conversion)

When you connect a normal TV to the unit. When you play a wide picture recorded on a DVD VIDEO disc, a portion of the picture is automatically cut off from the left and right sides of the image.

Depending on the disc, it may not be possible to playback in this mode. In that case, the picture is played back as in 4:3

LB. mode.

• 16:9 WIDE (Wide Television screen)

When you connect a wide-screen TV to the unit.

SCREEN SAVER

COMPRESSION

You can compress the dynamic range of the sound if needed. Using this function, you can listen to sound at low

LANGUAGE	AUDIO	DISPLAY	SYSTEM
DIGITAL AUDIO OUTPUT		STREAM / PCM
DOWN MIX		Lo / Ro
COMPRESSION			ON

A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes.

volumes easily.

	EXIT
PRESS	KEY

• MODE 1

The current picture gets

dark.

LANGUAGE	AUDIO	DISPLAY	SYSTEM
MONITOR TYPE		4:3 LB
SCREEN SAVER		MODE 2
ON SCREEN GUIDE		ON

•ON

Audio is played back with the dynamic range compressed.

•OFF

Audio is played back as it was recorded.

• MODE 2

The “screen saver” picture

appears and its brightness

changes.

	EXIT
PRESS	KEY

38