JVC XV-FA90BK, XV-FA92SL manual Class Laser Product

Page 2

Warnings, Cautions and Others

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT.

DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue : Neutral

Brown : Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

Caution: STANDBY/ON button!

Disconnect the mains plug to shut the power off completely (the STANDBY/ON lamp goes off).

The STANDBY/ON button in any position does not disconnect the mains line.

÷When the unit is on standby, the STANDBY/ON lamp lights red.

÷When the unit is turned on, the STANDBY/ON lamp lights green. The power can be remote controlled.

CAUTION:

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be con- sidered and local rules or laws governing the disposal of these bat- teries must be followed strictly.

Do not use this apparatus in a bathroom or places with water. Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on top of this apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage. Locate the apparatus as follows:

Front:

No obstructions open spacing.

Sides:

No obstructions in 3 cm from the sides.

Top:

No obstructions in 5 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

Spacing 15 cm or more

Front

XV-FA90BK/

XV-FA92SL

Wall or obstructions

Stand height 5 cm or more

Floor

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS

1 CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE

2 WARNING LABEL, PLACED INSIDE THE UNIT

CLASS 1

LASER PRODUCT

CAUTION: Invisible

laser

radiation when open

and

interlock failed or defeated.

AVOID DIRECT EXPOSURE

TO BEAM.

(e)

 

 

VARNING:

Osynlig

laser-

str lning

n r

denna

del

r

ppnad

och

sp rren

r

urkopplad.

Betrakta

ej

str len.

 

 

 

(s)

 

 

 

 

 

ADVARSEL: Usynlig laser-

str ling ved bning,

n r

sikkerhedsafbrydere

er

ude

af funktion. Undg

uds t-

telse for str ling

 

(d)

VARO: Avattaessa ja

suo-

jalukitus

ohitettaessa

olet

alttiina

n kym tt m lle

lasers teilylle. ˜l katso

s teeseen.

 

(f)

 

 

 

1.CLASS 1 LASER PRODUCT

2.DANGER : Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3.CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel.

Image 2
Contents $%.9$6 Class Laser Product Table of Contents Features IntroductionSupplied accessories ¶ During DVD Video playback To select a scene angle from the angle list display AnglePress and hold Angle for more than 1 second Safety precautions Important cautionsFront panel Preliminary knowledgeNames of parts and controls Display window Remote control unit Previous button 29, 35 @ Infrared signal-emitting windowTV/VIDEO Cancel button 24 Clear button 29, 40Rear panel Basic operations of on-screen displays Operational PrinciplesOn-screen displays Opening displayDVD Control for DVD Audio display Parental Lock display seeDVD Control for DVD Video display VCD Control display To prevent the monitor from burning out Screen SaverCD Control display MP3 Control display seeHow to use numeric buttons On-screen guide iconsAudio formats About discsPlayable disc types Playable discsDisc structure Before making any connections Getting startedConnections To connect to a conventional TVScart cable not supplied Unit To connect to a TV with the Scart connectorCOMP. switch Amplifier or receiver To connect to an audio amplifier or receiverRed White Audio cable Audio/Video Cable Supplied Supplied Amplifier or receiverRed To connect to audio equipment with a digital inputOptical digital cable not supplied To install batteries in the remote control unit Using the remote control unitTo connect the power cord Remote sensor Precautions for the safe use of batteriesPrecaution You can operate your TV from the remote control unit To use the remote control unit for TV operationSetting the remote control signal for operating your TV Manufacturer code list+10 Inserting and removing discs Basic operationsTurning on/off the unit Press0 OPEN/CLOSE on the front panelTo insert an 8-cm disc Place one or two discs in the traysWith the label side up Place it in the inner recessTo start playback About Disc indicators 1 throughBasic playback To stop playback temporarily Method 1 from the remote control unit onlyTo stop playback completely To advance or reverse playback rapidly while monitoringPress 4 or ¢ To locate the beginning of the scene or songChanging discs during playback Play Exchange Press EXCHANGE/ Disc SkipTo resume playback Resuming playbackTo memorize the interrupted position Audio Video Advanced operationsFunction Playing from a specific position on a discUse the numeric buttons to select the desired item To locate a desired scene from the DVD menuPress TOP Menu or Menu ExampleUse the numeric buttons to specify the number Unit status Disc type What is SpecifiedWhen appears on the TV screen For an Audio CD or Video CD, a track is SpecifiedPress Enter To locate a desired selection using 4 or ¢Press on Screen Message area For DVD AudioScreen example Use Cursor 5/∞ to move to Time SEARCH, then press EnterUse the numeric buttons 0 to 9 to enter the time Press Digest When you make a mistakeTo locate a desired scene from the display Digest Use Cursor 5/∞/2/3 to move to select the desired sceneTo display continuous still pictures Strobe To cancel strobe playSpecial picture playback Press and hold 8 for more than 1 secondTo return to normal playback Press Enter Use Cursor 5/∞/2/3 to move the zoomed positionPress Zoom + or ¶ During playback or while paused3a for Audio CD/Video CD Changing the playback orderTo playback in the desired order Program Use Cursor 5/∞ to move to Program and press EnterTo quit program playback To playback in random order RandomUse Cursor 5/∞ to move to Random To quit random playback in the middlePress Repeat Repeat playbackTo repeat the current selection or all tracks Repeat During DVD Video playbackDisc type Display window On-screen display Selected repeat mode For Video CDAudio CD/Video CD To stop repeat playback PressFrom normal screen Selecting a scene angleTo select a scene angle from the normal screen Angle Press AngleUse Cursor 2/3 or Angle to select the desired angle number From on-screen displayUse Cursor 5/∞ or Angle to move to Angle Total number of recorded anglesFrom on-screen display DVD Video only Changing the language and soundTo select the subtitle language Subtitle Press Audio S.FREQ To change the audio language or sound AudioUse Cursor 5/∞ or Audio S.FREQ to move to Audio For DVD AUDIO/DVD VideoSelected preset To adjust the picture character VFPPress VFP to select the desired preset Miscellaneous functionsSelected effect mode Adjust the level of the parameter using Cursor 2/3Select the desired mode by using 3D Phonic To simulate surround sound 3D PhonicDuring playback for DVD AUDIO/Audio CD Press Cursor 2/3 to adjust the effect levelUse Cursor 5/∞ to move to Time Select Use Cursor 5/∞ or page to move to To select a still picture on a DVD Audio discFrom normal display Use Cursor 2/3 or page to select the desiredPress Cursor 5 or ∞ while holding down ¶ When no disc is insertedTo playback a bonus group of a DVD Audio disc Display Window TV screenChecking the sampling frequency Press Audio S.FREQ for more than one secondOperations MP3 disc playbackAbout MP3 disc Basic operationsSpecifying the desired Group and Track Highlight a desired Group using Cursor Press EnterHighlight a desired Track using Cursor Track timeYou can repeat playback of the current track or group You cannot repeat all contents on discRepeat playback ¶ During playback or while stoppedSelecting preferences Initial settingsHow to set preferences Language and display preferenceEnglish Setting changes as followsSelected language FrenchAudio and system preference Lt/Rt Only for Dolby Digital DVD Video DiscsOutput Playback discs L0/R0Back DTS-encoded DVD This item controls Output signals when playingDefault setting DVD1 Video discsBass redirect Available only when selecting Expert Speaker settingSpeaker Channel setting Speaker size settings Available only when selecting ExpertTest tone Available only while setting Level or Delay Available only when selecting ExpertLimiting playback by children To set Parental Lock for the first timeTo change the set level, use Cursor 2/3 to To change the settingsPoints Password Screen display appearsEnter your 4-digit password using the numeric buttons 0 to Use the Cursor 5/∞ to move to YES, then press EnterAdditional information Care and handling of discsDisplay window does not Light when the STANDBY/ON TroubleshootingSymptom Possible case Remedy Indicator on the front panel is litSpecifications Appendix ATable of languages and their abbreviations Appendix BCountry code list for Parental Lock Above ALL