JVC XV-501BK manual To set other preference items, Preference 2 can be set as follows

Page 58

Setting and adjustment

To set other preference items

The PREFERENCE 2 can be set as follows:

DIGITAL AUDIO OUTPUT

To connect the unit‘s digital output to an external amplifier or receiver equipped with a digital input, this item must be set correctly.

•PCM ONLY:

When you connect the DIGITAL OUT jack of the unit and the linear PCM digital input of an audio equipment.

PREFERENCE1	PREFERENCE2
DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		Lt/Rt
COMPRESSION		OFF
SCREEN SAVER		MODE1
AV COMPULINK MODE		DVD1
AUTO STANDBY		OFF
PRESS	KEY

•STREAM/PCM:

When you connect to the Dolby digital input of an amplifier with built-in DTS and Dolby Digital decoder.

•DOLBY DIGITAL/PCM:

When you connect to the Dolby digital input of a Dolby Digital decoder, an amplifier with built-in Dolby Digital decoder

The following chart shows the relationship between types of playback discs and output signals.

Playback discs		Output

	STREAM/PCM	DOLBY DIGITAL/PCM	PCM ONLY

DVD with 48-kHz,	48-kHz, 16-bit linear	←	←
16-bit linear PCM	PCM
DVD with 48-kHz,	48-kHz, 20-bit linear	←	←
20/24-bit linear PCM	PCM
DVD with 96-kHz,	No output	←	←
linear PCM
DVD with DTS	DTS bitstream	No output	No output
DVD with Dolby	Dolby Digital	Dolby Digital	48-kHz, 16-bit
Digital	bitstream	bitstream	linear PCM
DVD with MPEG	MPEG bitstream	48-kHz, 16-bit linear	48-kHz, 16-bit
audio		PCM	linear PCM
Video CD	44.1-kHz, 16-bit linear	←	←
	PCM
Audio CD	44.1-kHz, 16-bit linear	←	←
	PCM
Audio CD with DTS	DTS bitstream	←	←

NOTES

¦When you play a CD disc with DTS, unnecessary audio signal output from the AUDIO OUT (analog) jack. Adjust the volume level of an amplifer connected to the AUDIO OUT jack of the unit to minimum.

¦When you do not connect the unit to the DTS decoder, a CD disc with DTS cannot be played back. Do not play a CD disc with DTS when the unit is connected to the DIGITAL jack other than it of the DTS decoder. If you do so, loud noise may be played back from speakers, and it cause of the breakdown of your speakers.

54

Image 58

Contents XV-501BK Mises en garde, précautions et indications diverses Supplied accessories Table of contents Selecting preferences Limiting playback by children Playing a scene close-upChecking the total disc time Features Using the instructions Changing the language and soundAvoid high temperatures Installation of the unitPower cord When you’re awayPreliminary knowledge Names of parts and controls Front panelDisplay window Rear panelRemote control unit CATV/SAT Power button Audio Volume buttonCancel button DVD/TV/CATV switch 23Display information On-screen displaysCD on-screen display DVD on-screen display during playbackVideo CD on-screen display during playback On-screen guide icons To prevent the monitor from burning outAbout invalid operation icon Playable disc types Preliminary knowledge about discsPlayable discs Non-playable discs Disc construction Getting started Yellow Video ConnectionsBefore making any connections RedWhite Connect Y to Y, PB to PB, PR to PR Connection to an audio amplifier or receiver To connect to an audio amplifier or receiverRed White Audio cable Not supplied Amplifier or receiver To connect to audio equipment with a digital input WhiteTo connect the power cord Turn on the unitPrecautions for the safe use of batteries To install batteries in the remote control unitPrecaution Power To turn on/off the unitChanging the remote control signal Using the remote control unitTo use the remote control unit for TV operation Manufacturer code listPress and hold Power Then press SET Do not release CATV/SAT Manufacturer’s code listSet DVD Catv on the remote control unit to Catv Keep holding Power until the next step is completedBasic operations Before operation Press Power to turn on your TVPress Power to turn on the unit To turn on your TV and the unitPress Close to close the disc tray Inserting and removing discsTo insert or remove discs Information about the opening displayTo stop playback completely Playing back a DVD Video or CD discTo playback a disc from the beginning Press StopPress Pause To stop playback temporarilyTo locate the beginning of the scene or song PressPress Resume 7During stop modeResuming playback Unit starts playback from the stored positionSelected effect mode Adjusting the surround soundPress to adjust the effect level To simulate the surround sound 3D PhonicPress How to use numeric buttonsSummary of basic operations Numeric buttons are used to select a track or title numberTo select a scene angle from the angle list display To adjust the picture quality VFPTo playback a scene close-up Zoom To select the subtitle language SubtitlePress Playing a specific scene on a DVD discTo locate the desired scene from the menu Use to select the desired item, then press EnterUnit begins playback from the selected title When is displayed in the TV screenUse 1 to 10 , +10 to select the desired title number Title you have selected is not contained in the discWhen is displayed in the TV screen in step When the chapter number is incorrect in stepTo return to the regular display To locate the desired scene by specifying the time When appears in the TV screen in step When you make a mistake in stepUnit starts playback from the selected time Use To select When you want to check moreDesired title To playback in slow-motion Slow Playing in slow-motionTo display still pictures Strobe Press Pause , then press SLOW+Press Zoom Playing a scene close-upTo playback a scene close-up Zoom Use to move the zoomed-in sceneTo repeat a title or chapter Repeat Repeat playbackUse to move to REPEAT, then press Enter To cancel A-B repeat playback To repeat a desired part A-B RepeatPress Angle Press Angle or to select the desired angle Viewing from multiple anglesTo select a scene angle from the on-screen display Angle Use to move to AngleUse to select desired angle Press Enter When appears on the TV screen in stepPress and hold Angle for more than 1 seconds Selected angle appears on the TV screenTo select the subtitle language Subtitle Changing the language and soundUse to move to Subtitle To select the desired Total number Use to move AudioUse to select desired audio language or sound Selected audio numberPress VFP or Processor on the front panel Adjusting the picture to suit preferencesTo adjust the picture quality VFP By pressing VFP or Processor on Front panelSetting and adjustment Selecting preferences Move to select the item you want to set by usingPress to select the setting you want Press Stop to stop the unitPreference 1 can be set as follows To set the language and display preference itemsSelected language Spanish Selected languageEnglish FrenchOn Screen Guide Preference 2 can be set as follows To set other preference itemsPlayback discs Output L0/R0 Lt/RtAudio is played back as it was recorded Picture is not scrolled ModePicture is scrolled Picture gets darkAV Compulink Mode Auto standby function is offPress Enter while holding down Stop Limiting playback by childrenTo set Parental Lock for the first time Parental Lock Use to select the US for country code and pressNew setting is effective To change the settings Parental LockLevel, then use to select the parental lock level To temporarily release the Parental lock Parental Lock Enter your 4-digit password using 0 toUse the to select YES or NO, then press Enter To select the time display mode Time Select To playback only the beginning of each track IntroPlaying a specific track on a disc To locate a desired track using Next or PreviousSelect a desired track number using To locate a desired track directlyTime minute and second then press Enter To locate a desired position by specifying the timeUse 0 to 9 to select Use to move to Time Search and pressWhen you make a mistake in step To playback in the desired order Program Changing the track orderPress Play to start program play Use to move to Random Unit can play tracks in random order 7During stop modeTo playback tracks in random order Random Color of Random changes Random play beginsUse To move To repeat a current track or all tracks RepeatTo quit repeat playback Press Enter at the end Use to move to A-BPart you want to repeat point B Color of Intro changes Sampling all tracksUse to move to Intro To stop Intro scanTo select the time display mode Time Select Each time you press Enter , the time mode changes as followsInformation about CD Text CD TextAudio CD operations Video CD operations Use Playing a specific scene on a Video CDTo use the menu of the Video CD recorded on PBC Desired number of the itemTo locate a disired track directly During playback without the PBC function or stop modeDuring playback without the PBC function Use to move to Time Search and press Time search function does not work during PBC playback Use to select the desired track When you want to check more Scenes, press . AdditionalUnit begins playback from the selected track Unit play the slowest speed, and each time you press To cancel zoom play Press ZoomYou can program tracks during playback To stop random play Unit can play tracks in random order 7During stop7Random play begins Press StopUse to move to Repeat 7During playback without PBC functionTo cancel A-B repeat To playback only the beginning of each track Intro To stop Intro scan Press StopAdjusting the picture and sound to suit preferences Selected of the picture quality tab lights up in yellowTo change the audio channel Audio Select the audio channels to be played back usingSelected audio channel Press Enter until Total Remain appears on the TV screen Checking the total disc timeUse to move to Time Select Total disc time appears on the TV screenCare and handling of discs Troubleshooting Connection and setup Operation SpecificationsCare and handling of discs How to handle discsMaintenance of discs Even on label sideTroubleshooting Symptom Possible case RemedyAV Compu Link remote control system Connection and SetupOperation Specifications Table of languages and their abbreviations Country code list for parental lock Page 1198FTYUBNPRI