JVC XV-501BK manual Lt/Rt, L0/R0, Audio is played back as it was recorded

Page 59

Setting and adjustment

DOWN MIX

By setting DOWN MIX correctly, you can get the optimum stereo mix for your audio system from DVD discs recorded with Dolby Digital surround multichannel audio.

•Lt/Rt:

You can monitor the unit’s audio output signals via an amplifier with built-in Dolby Pro Logic Decoder.

PREFERENCE1	PREFERENCE2
DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		Lt/Rt
COMPRESSION		OFF
SCREEN SAVER		MODE1
AV COMPULINK MODE		DVD1
AUTO STANDBY		OFF
PRESS	KEY

•L0/R0:

You can monitor the unit’s audio output signals via a TV, an amplifier with no built-in Dolby Pro Logic Decoder, or the unit’s headphone jack. Also for recording DVD audio output to a cassette tape, MD, etc.

COMPRESSION

You can compress the dynamic range of the sound if you need. Using this function, you can listen to sound in small volume easily.

•ON

Audio is played back with the dynamic range compressed.

•OFF

Audio is played back as it was recorded.

PREFERENCE1	PREFERENCE2
DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		Lt/Rt
COMPRESSION		ON
SCREEN SAVER		MODE1
AV COMPULINK MODE		DVD1
AUTO STANDBY		OFF
PRESS	KEY	Setting the unit

NOTES

¦The compression function works only when playing back the disc recorded on DOLBY DIGITAL 1 CH or 2CH. The setting is not effective on other discs.

¦The compression function does not work when the 3D PHONIC function is activated.

¦The downmix function does not work when the 3D PHONIC fucntion is activated.

55

Image 59

Contents XV-501BK Mises en garde, précautions et indications diverses Supplied accessories Table of contents Checking the total disc time Playing a scene close-upSelecting preferences Limiting playback by children Features Changing the language and sound Using the instructionsWhen you’re away Installation of the unitPower cord Avoid high temperaturesPreliminary knowledge Front panel Names of parts and controlsRear panel Display windowRemote control unit DVD/TV/CATV switch 23 Audio Volume buttonCancel button CATV/SAT Power buttonOn-screen displays Display informationVideo CD on-screen display during playback DVD on-screen display during playbackCD on-screen display About invalid operation icon To prevent the monitor from burning outOn-screen guide icons Playable discs Non-playable discs Preliminary knowledge about discsPlayable disc types Disc construction Getting started Red ConnectionsBefore making any connections Yellow VideoWhite Connect Y to Y, PB to PB, PR to PR Red White Audio cable Not supplied Amplifier or receiver To connect to an audio amplifier or receiverConnection to an audio amplifier or receiver White To connect to audio equipment with a digital inputTurn on the unit To connect the power cordPrecaution To install batteries in the remote control unitPrecautions for the safe use of batteries To turn on/off the unit PowerManufacturer code list Using the remote control unitTo use the remote control unit for TV operation Changing the remote control signalKeep holding Power until the next step is completed Manufacturer’s code listSet DVD Catv on the remote control unit to Catv Press and hold Power Then press SET Do not release CATV/SATBasic operations To turn on your TV and the unit Press Power to turn on your TVPress Power to turn on the unit Before operationInformation about the opening display Inserting and removing discsTo insert or remove discs Press Close to close the disc trayPress Stop Playing back a DVD Video or CD discTo playback a disc from the beginning To stop playback completelyPress To stop playback temporarilyTo locate the beginning of the scene or song Press PauseUnit starts playback from the stored position 7During stop modeResuming playback Press ResumeTo simulate the surround sound 3D Phonic Adjusting the surround soundPress to adjust the effect level Selected effect modeNumeric buttons are used to select a track or title number How to use numeric buttonsSummary of basic operations PressTo select the subtitle language Subtitle To adjust the picture quality VFPTo playback a scene close-up Zoom To select a scene angle from the angle list displayUse to select the desired item, then press Enter Playing a specific scene on a DVD discTo locate the desired scene from the menu PressTitle you have selected is not contained in the disc When is displayed in the TV screenUse 1 to 10 , +10 to select the desired title number Unit begins playback from the selected titleTo return to the regular display When the chapter number is incorrect in stepWhen is displayed in the TV screen in step To locate the desired scene by specifying the time Unit starts playback from the selected time When you make a mistake in stepWhen appears in the TV screen in step Desired title When you want to check moreUse To select Press Pause , then press SLOW+ Playing in slow-motionTo display still pictures Strobe To playback in slow-motion SlowUse to move the zoomed-in scene Playing a scene close-upTo playback a scene close-up Zoom Press ZoomUse to move to REPEAT, then press Enter Repeat playbackTo repeat a title or chapter Repeat To repeat a desired part A-B Repeat To cancel A-B repeat playbackUse to move to Angle Viewing from multiple anglesTo select a scene angle from the on-screen display Angle Press Angle Press Angle or to select the desired angleSelected angle appears on the TV screen When appears on the TV screen in stepPress and hold Angle for more than 1 seconds Use to select desired angle Press EnterUse to move to Subtitle To select the desired Changing the language and soundTo select the subtitle language Subtitle Selected audio number Use to move AudioUse to select desired audio language or sound Total numberBy pressing VFP or Processor on Front panel Adjusting the picture to suit preferencesTo adjust the picture quality VFP Press VFP or Processor on the front panelSetting and adjustment Press Stop to stop the unit Move to select the item you want to set by usingPress to select the setting you want Selecting preferencesSelected language To set the language and display preference itemsPreference 1 can be set as follows French Selected languageEnglish SpanishOn Screen Guide Playback discs Output To set other preference itemsPreference 2 can be set as follows Audio is played back as it was recorded Lt/RtL0/R0 Picture gets dark ModePicture is scrolled Picture is not scrolledAuto standby function is off AV Compulink ModeUse to select the US for country code and press Limiting playback by childrenTo set Parental Lock for the first time Parental Lock Press Enter while holding down StopLevel, then use to select the parental lock level To change the settings Parental LockNew setting is effective Use the to select YES or NO, then press Enter Enter your 4-digit password using 0 toTo temporarily release the Parental lock Parental Lock To playback only the beginning of each track Intro To select the time display mode Time SelectTo locate a desired track directly To locate a desired track using Next or PreviousSelect a desired track number using Playing a specific track on a discUse to move to Time Search and press To locate a desired position by specifying the timeUse 0 to 9 to select Time minute and second then press EnterWhen you make a mistake in step Press Play to start program play Changing the track orderTo playback in the desired order Program Color of Random changes Random play begins Unit can play tracks in random order 7During stop modeTo playback tracks in random order Random Use to move to RandomTo quit repeat playback To repeat a current track or all tracks RepeatUse To move Part you want to repeat point B Use to move to A-BPress Enter at the end To stop Intro scan Sampling all tracksUse to move to Intro Color of Intro changesEach time you press Enter , the time mode changes as follows To select the time display mode Time SelectCD Text Information about CD TextAudio CD operations Video CD operations Desired number of the item Playing a specific scene on a Video CDTo use the menu of the Video CD recorded on PBC UseDuring playback without the PBC function During playback without the PBC function or stop modeTo locate a disired track directly Use to move to Time Search and press Time search function does not work during PBC playback Unit begins playback from the selected track When you want to check more Scenes, press . AdditionalUse to select the desired track Unit play the slowest speed, and each time you press Press Zoom To cancel zoom playYou can program tracks during playback Press Stop Unit can play tracks in random order 7During stop7Random play begins To stop random play7During playback without PBC function Use to move to RepeatTo cancel A-B repeat To stop Intro scan Press Stop To playback only the beginning of each track IntroSelected of the picture quality tab lights up in yellow Adjusting the picture and sound to suit preferencesSelected audio channel Select the audio channels to be played back usingTo change the audio channel Audio Total disc time appears on the TV screen Checking the total disc timeUse to move to Time Select Press Enter until Total Remain appears on the TV screenConnection and setup Operation Specifications Care and handling of discs TroubleshootingEven on label side How to handle discsMaintenance of discs Care and handling of discsSymptom Possible case Remedy TroubleshootingConnection and Setup AV Compu Link remote control systemOperation Specifications Table of languages and their abbreviations Country code list for parental lock Page 1198FTYUBNPRI