3 Press ENTER.
The second page is shown, in which the
DVD PLAYER SET UP |
|
|
MONITOR TYPE |
| 4:3 L.B. |
PICTURE SOURCE | 16:9 | |
4:3 LB | ||
SCREEN SAVER |
| 4:3 PS |
| ON | |
|
| 16:9 MULTI |
BACK GROUND |
| 4:3STANDARDMULTI LB |
|
| 4:3 MULTI PS |
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM | |
ENTER |
|
|
MONITOR TYPE options
4 Press 5/∞ to select the desired monitor type.
For a normal (conventional) TV, select [4:3 LB] or [4:3 PS]. For a
5 Press ENTER.
The third page is shown, in which the
DVD PLAYER SET UP |
|
|
DIGITAL AUDIO OUTPUT | DOLBY DIGITAL/PCM | |
ANALOG DOWN MIX | PCM ONLY | |
DOLBY PROLOGIC | ||
|
| DOLBY DIGITAL/PCM |
D RANGE CONTROL | STREAM/PCM | |
OUTPUT LEVEL |
|
|
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM | |
ENTER |
|
|
DIGITAL AUDIO OUTPUT options
6 Press 5/∞ to select a desired digital output signal type.
Set this item correctly when you connect the player to an external surround decoder or D/A converter. (If you do not connect the player to such a device, you do not have to set this item.)
•When connecting to other digital device, select [PCM ONLY].
•When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].
•When connecting to a DTS decoder, select [STREAM/PCM].
7 Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press SET UP for a few seconds until the DVD PLAYER SET UP display appears.
Starting playback
1 Press 0 on the player (or OPEN/CLOSE on the remote control unit) to open the disc tray.
2 Place a disc in the disc tray.
With the label side up
• To insert an
3 Press 0 on the player (or OPEN/CLOSE on the remote control unit) to close the disc tray.
4 Press 3 on the player or 3 (SELECT) on the remote control unit.
The player starts playback from the beginning.
•Depending on the disc, playback starts when you close the disc tray.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back.
For DVD VIDEO
1Press 5/∞/2/3 to select a desired item.
2Press ENTER or 3 (SELECT).
The player starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item.
The player starts playback of the selected item.
NOTES
•Do not insert an unplayable disc. (See page 2.)
•When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the player.
You can see the current selection number (the title/chapter | playback | |||
To check the playback status |
|
| Basic | |
number for DVD VIDEO or track number for SVCD/Video CD/ | ||||
| ||||
Audio CD), time information (the track or chapter time while |
| |||
stopped, or elapsed track or chapter time during playback) and |
| |||
the transport status (stop, playback, pause, etc.) on the TV |
| |||
screen. |
|
|
| |
Press ON SCREEN. |
|
|
| |
Example: for DVD VIDEO |
|
|
| |
Current chapter | Current transport |
| ||
Transfer rate | number | status |
| |
8.5Mbps | TITLE 33 | CHAP 33 | TOTAL 1:25:58 |
Current title number | Disc elapsed |
| time |
Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access various functions. See page 18 for details about the menu bar.
To turn off the status bar
Press ON SCREEN repeatedly until the status bar goes off.
To change the display window contents
Press DISPLAY.
Example: for DVD VIDEO
Each time you press DISPLAY, the total time display and the title/chapter number display appear alternately.
Total time | Title number |
Chapter number
9