JVC XV-522SL manual Audio

Initial settings

SUBTITLE

You can select the default subtitle language to be displayed if it is contained on the disc.

Each time you press	LANGUAGE	AUDIO	DISPLAY		SYSTEM
CURSOR 3, the language	MENU LANGUAGE			ENGLISH
	AUDIO LANGUAGE			ENGLISH
setting changes in the	SUBTITLE			ENGLISH
following order:	ON SCREEN LANGUAGE			ENGLISH
					EXIT
	PRESS	KEY

AUDIO page
DIGITAL AUDIO OUTPUT
To connect the unit‘s	LANGUAGE	AUDIO	DISPLAY SYSTEM
digital output to an
	DIGITAL AUDIO OUTPUT		DIGITALDOLBY /PCM
external device equipped	DOWN MIX		Lo / Ro
with a digital input, this	COMPRESSION		ON
item must be set			EXIT
correctly.	PRESS	KEY

ENGLISH = SPANISH = FRENCH = CHINESE = GERMAN = ITALIAN = JAPANESE = language code from AA to ZU

(See “Table of languages and their abbreviations” at the end of this manual.)

Pressing CURSOR 2 changes the language setting in the reverse order of the above.

*If the selected language is not recorded, the disc’s default subtitle language will be displayed.

ON SCREEN LANGUAGE

You can select the on-screen display language to be displayed.

Each time you press	LANGUAGE	AUDIO	DISPLAY		SYSTEM
	MENU LANGUAGE			ENGLISH
CURSOR 3, the language	SUBTITLE			ENGLISH
	AUDIO LANGUAGE			ENGLISH
setting changes as	ON SCREEN LANGUAGE			ENGLISH
follows:					EXIT
	PRESS	KEY

ENGLISH

DEUTSCH (German)

FRANCAIS (French)

English	ON SCREEN LANGUAGE	ENGLISH
German	BILDSCHIRMMENUE-SPRACHE	DEUTSCH
French	LANGUE D’ECRAN	FRANCAIS

Pressing CURSOR 2 changes the language setting in the reverse order of the above.

•PCM ONLY:

When you connect the DIGITAL OUT jack of the unit to the linear PCM digital input of other audio equipment.

•STREAM/PCM:

When you connect to the digital input of an amplifier to a built-in DTS, Dolby Digital, or MPEG multichannel decoder.

•DOLBY DIGITAL/PCM:

When you connect to the digital input of a Dolby Digital decoder, or an amplifier with a built-in Dolby Digital decoder.

The following chart shows the relationship between types of playback discs and output signals.

Playback discs		Output
	STREAM/PCM	DOLBY DIGITAL/PCM	PCM ONLY
DVD with 48-kHz,	48-kHz,	←	←
	16-bit linear
16-bit linear PCM	PCM
DVD with 48-kHz,	48-kHz,	←	←
20/24-bit linear	20-bit linear
PCM	PCM
DVD with 96-kHz,	No output	←	←
linear PCM
DVD with DTS	DTS	No output	←
	bitstream
DVD with Dolby	Dolby Digital	←	48-kHz, 16-bit
Digital	bitstream		linear PCM
DVD with MPEG	MPEG	48-kHz, 16-bit	←
multichannel	bitstream	linear PCM
Video CD	44.1-kHz,	←	←
	16-bit linear
	PCM
Audio CD	44.1-kHz,	←	←
	16-bit linear
	PCM
Audio CD with	DTS	←	←
DTS	bitstream

Initial settings

NOTES

•The unit does not provide the DTS decoding function.

•When playing a DVD VIDEO or Audio CD disc with DTS, use a DTS decoder to get correct signals from your speakers. Never use the unit's analog output jacks, which output incorrect signals that may damage your speakers.

If you connect the analog outputs and digital outputs simultaneously, be sure to select the source of the amplifier correctly, or set the level control of the amplifier connected to the analog outputs to minimum.

36