JVC XV-N412S manual Troubleshooting, Power, Picture, Audio

Page 32

Troubleshooting

Power

Power does not come on.

\Power plug is not inserted securely. Plug in securely.

Operation

“REGION CODE ERROR!” is shown on the TV screen.

\Region code of the inserted disc does not match the player. Check the region code of the disc printed on the disc jacket.

Operation is not possible.

\Microcomputer malfunction due to lightning or static electricity. Turn off the power and unplug the power cord, then connect the power cord again.

\Moisture condensation caused by a sudden change of temperature or humidity. Turn off the power, then turn it on a few hours later.

\The disc does not allow the operation, or an unplayable disc is inserted. Check and replace the disc (see page 2).

[LOCK] is displayed on the display window and the disc tray does not open.

\When you press 0 while pressing down 7 on the player in standby mode, the tray lock function is activated. The disc tray cannot be opened or closed in this status. To release this status, press 0 while pressing down 7 on the player in standby mode.

Setting cannot be changed in the [LANGUAGE] preference display.

\Stop playback and change the setting in the [LANGUAGE] preference display.

The audio language and subtitle cannot be changed.

\Only one language is recorded on the disc currently being played back.

\The disc being played back does not accept the AUDIO button and SUBTITLE button operation. Change the subtitle using [SUBTITLE] in the [LANGUAGE] preference display (see page 25).

No subtitle is displayed.

\No subtitle is recorded on the disc currently being played back.

\[OFF] is selected in [SUBTITLE] in the [LANGUAGE] preference display. Select the desired language in [SUBTITLE] (see page 25).

\Subtitle may not be displayed correctly during A-B repeat playback.

Additional information

Picture

Picture is noisy.

\The player is connected to a VCR directly and the copyguard function is activated. Connect the player so that the picture signal flows directly to the TV.

\With some discs, the picture may be blurred when [PICTURE SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE SOURCE] to [VIDEO (NORMAL)] or [VIDEO (ACTIVE)].

Correct picture cannot be obtained.

\Connect only one type of cable to the jack(s) you want to use on this player, either the VIDEO jack, S-VIDEO jack or COMPONENT VIDEO OUT jacks. (Note that you can connect cables to the VIDEO jack and COMPONENT VIDEO OUT jacks at the same time.) If an S-VIDEO cable is connected to the S-VIDEO jack, the player is set to the S-VIDEO output mode automatically.

No picture is displayed on the TV screen or the screen is blurred or divided into two parts.

\The player is in the progressive scanning mode while the PAL/ NTSC selector is set to “PAL.” Set the 525i/625i - 525p/625p - REMOTE selector on the rear panel to “525p/625p,” or set it to “REMOTE” and make the Progressive scanning mode inactive by using the VFP - PROGRESSIVE SCAN button (see page 5).

Audio

DVD VIDEO disc playback sound level is lower than TV broadcast sound level.

\Set the [D.RANGE CONTROL] preference to [TV MODE] (see page 26).

Analog audio output is distorted.

\Set the [OUTPUT LEVEL] preference to [LOW] (see page 26).

MP3/WMA

No sound comes out.

\MP3/WMA disc is recorded with the “packet writing (UDF file).” It cannot be played.

Files (tracks) are not played in the recorded order.

\This player plays the files in the alphabetic order. So, the playback order can vary.

WMA files cannot be played back.

\The file is copy protected.

\The file is recorded with a bit rate under 48 kbps. The player does not support such WMA files.

JPEG

No picture is played back, or the screen turns black.

\Format of the files is not the baseline JPEG. The player supports only the baseline JPEG format.

The preference display cannot be turned on.

\You cannot turn on the preference display when a JPEG disc is inserted.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Changing the initial settings Region code of DVD VideoImportant for Laser Products Supplied accessories PrecautionsTable of contents About this manualBefore operation About discsFront panel Display window Remote control unitNames of parts and controls Connecting to a TV Connecting to a conventional TVConnecting to a TV with an S-video jack PreparationsSource Connecting to a TV with component jacksProgressive scan video playback available Connecting to a digital audio device Connecting to optional audio equipmentConnecting to a stereo audio amplifier/receiver Using the remote control unit Connecting the power cordTo install batteries Precautions of the safe use of batteriesTurning the player on and off Initial setupBasic playback Starting playback About On-screen guide icons Changing the resume modeRestarting playback after stopping resuming playback Various kinds of playback Playback at various speedsUsing the numeric buttons Locating the beginning of a scene or songPlaying from a specific position To locate a desired scene from the DVD menuChanging the playback order To specify a desired titleTo play back in a specific order Program play About PBC Playback ControlTo exit the program mode To play back in random order Random playTo stop program playback To clear the programRepeat playback Changing the language, sound and scene angleTo repeat a desired part A-B repeat playback To select the subtitle language SubtitleSpecial picture and sound effects To change the audio language or sound AudioTo select a scene angle of DVD Video Angle To zoom in picturesTo dismiss the 3D Phonic window To adjust the picture character VFPTo dismiss the VFP mode selection window Basic operation procedure Menu bar functionsTo bring up the menu bar To dismiss the menu bar and status barTime mode selection Menu bar functions for DVD VideoMenu bar functions for SVCD/Video CD/ Audio CD CHAP. Chapter searchMP3/WMA disc playback OperationsAbout MP3/WMA discs Basic operationsRepeat playback Direct selectionDuring playback or while stopped, press Press the numeric buttons to specify a desired group numberJpeg disc playback About Jpeg discsBasic operations To see a desired pictureViewing pictures continuously slide show mode To zoom in the pictureTo start the slide show Repeat functionChanging the initial settings How to set preferencesSelecting preferences About the Preference displayLanguage menu Picture menuYou can select the on-screen display language of the player ENGLISH, CHINESE, SpanishAudio menu Others menuLimiting playback by children To set Parental Lock for the first timeStop mode, bring up the Others menu Press 5/∞ to move To select Parental Lock then press EnterTo change the settings To temporarily release the Parental LockAV Compu Link remote control system Connection and setupAdditional information OperationTroubleshooting PowerPicture AudioSpecifications Appendix a Digital output signal chartAppendix B Country/Area code list for Parental Lock ForAppendix D Glossary DVD Player

XV-N412S specifications

The JVC XV-N412S is a versatile and robust DVD player that combines advanced technology with user-friendly features, making it a popular choice for home entertainment enthusiasts. This model is designed to deliver high-quality video and audio performance, catering to a wide range of media formats.

One of the main features of the JVC XV-N412S is its compatibility with various disc formats. It supports not only standard DVDs but also Video CDs (VCDs), Super VCDs, and Audio CDs, allowing users to enjoy their favorite movies and music without having to switch devices. Additionally, the player is capable of playing back DVD-R/RW and CD-R/RW discs, making it flexible for personal media collections.

An impressive characteristic of the XV-N412S is its progressive scan feature. This technology provides a clearer and sharper image by reducing flicker and enhancing detail in video playback. The progressive scan output is particularly noticeable when watching high-quality DVDs, making it a valuable asset for those who prioritize visual fidelity.

Moreover, the JVC XV-N412S is equipped with built-in Dolby Digital and DTS decoding capabilities. This feature contributes to a rich and immersive audio experience, perfect for home theater setups. Users can connect the player to a surround sound system to fully appreciate the dynamic audio track of their favorite films.

Connectivity is also well-considered in the design of the XV-N412S. It includes multiple output options, including composite video, S-video, and component video outputs, ensuring compatibility with a variety of televisions and display devices. The player also features both optical and coaxial digital audio outputs, providing options for high-quality audio transfer to external sound systems.

Another highlight of the JVC XV-N412S is its user-friendly interface and remote control. The on-screen menu is intuitive, allowing users to navigate through settings and options effortlessly. The remote provides easy access to all the functions, including playback controls and setup adjustments.

In terms of build quality, the JVC XV-N412S is designed with durability in mind, ensuring longevity and reliable performance. Its sleek design complements modern entertainment systems, making it an aesthetically pleasing addition to any home setup.

Overall, the JVC XV-N412S is a feature-packed DVD player that excels in versatility, video and audio quality, and ease of use, making it a solid choice for anyone looking to enhance their home entertainment experience.
Top Page Image Contents