JVC LVT2013-001A Recording from DV Input, Before DV dubbing, Recording from a Digital Camcorder

Page 37

Recording from DV Input

Before DV dubbing

You can connect a DV-equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals.

This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible.

You cannot connect more than one DV camcorder at a time to this recorder.

You cannot control this recorder from external equipment connected via the DV IN jack (including two recorders).

It may not always be possible to control the con- nected camcorder via the DV IN jack.

Digital camcorders can usually record audio as stereo 16-bit/48kHz, or twin stereo tracks of 12- bit/32kHz. This recorder can only record one stereo audio track. Set [DV Record Audio] option to Audio 1 or Audio 2 as required (see page 17).

Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).

Picture disturbance on the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or the DV cable becomes disconnected.

Note:

•Connect the DV cable after turnning the camcorder off.

•The unit may not acknowledge the camcorder depending on the kinds. In this case, you may have it acknowledged by switching the unit off, and then on.

Recording from a Digital Camcorder

You can record from a digital camcorder connected to the DV IN jack on the front panel of this recorder. Using the recorder’s remote, you can control both the camcorder and this recorder.

Before recording, make sure that the audio input for the DV IN jack is set up (see page 17).

Tips:

•The source signal must be DVC-SD format.

•Some camcorders cannot be controlled using this recorder’s remote.

•If you connect a second recorder using a DV cable, you cannot control the second DVD from this one.

•You cannot control this unit remotely from a com- ponent connected to the DV IN jack.

•You cannot record date and time information from a DV cassette.

•Disconnecting the DV cable while recording a contents of the connected digital camcorder may result in malfunction.

1.Make sure your digital camcorder is connected to the front panel DV IN jack. See page 13.

2.Press AUX repeatedly to select the DV input.

3.Find the place on the camcorder tape that you want to the recording to start from.

For best results, pause playback at the point from which you want to record.

Depending on your camcorder, you can use this recorder’s remote to control the camcorder using the STOP, PLAY, BACKWARD, FOR- WARD and PAUSE functions.

4. Press z REC once to start recording.

Recording is automatically stopped if the recorder detects no signal.

You can pause or stop the recording by press- ing PAUSE/STEP (X) or STOP (x).

You cannot control the camcorder from this Remote Control during recording.

In Video mode, the final frame of the recording may remain displayed on screen for a while after recording stops.

Note:

When ‘Not connected to camcorder’ shows on the TV screen, the PLAY & RECORD functions won’t work. To resume these functions, press AUX to get out of DV input mode.

Troubleshooting

If you cannot get a picture and/or audio through the DV IN jack, check the bullet points:

Make sure the DV cable is properly connected. Try switching off the connected equipment then switch back on.

Try switching the audio input.

Note:

Depending on the connected camcorder, you may not be able to control it using the Remote Control supplied with this recorder.

RECORDING

33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents LVT2013-001A J DR-MV80BRisk of Electric Shock Do not Open Regulatory Information FCC Part Important Safety Instructions Resetting the Recorder Language Code List TroubleshootingSpecifications WarrantySymbol Used in this Manual About the Symbol DisplayMoisture Condensation Recommended recordable DVD discs Recordable and Playable DiscsRegional Code Playable DiscsRestrictions on video recording What is ‘CPRM’?Copyright Front Panel About the Remote Control Remote ControlFeature is not available Remote Control A/B/C/D Code Switching Remote Control Function Refer toRear Panel AC Power CordHdmi Output Audio Output Left/RightVideo connection Connections to your TVComponent Video connection Audio connectionAbout Hdmi Hdmi connectionType a Digital Multi-channel sound Connection to an AmplifierAccessory Audio/Video A/V Connections to Recorder Connecting a Digital CamcorderCable/Satellite box Connection to unit Using the Home Menu Initial Setup WizardSetup MovieGeneral Settings Initial SettingsAudio Settings Language SettingsDisc Settings Recording SettingsDisc Label FinalizeDisc Protect DivX Registration Code DivXGeneral Explanation of On-Screen Display When DVD-RW in VR mode is insertedDisplaying Information While Watching AV input source Displaying Disc Information on-screenVCR Playback Options Playing a Tape Playing a DVDButtons Operations Buttons Operations Discs DVD or Video CD Playback FeaturesChosen end point then the repeat sequence begins End point during playback. Press Enter at yourChapter Repeats the current chapter Title Repeats the current titleSpecial Playback Options Movie List menu options Playing a DivX Movie FileDivX file requirement Playable Codec format DIV3, MP43, DIVX, DX50Music List menu options Playing an Audio CD or MP3/WMA filesRandom MP3/WMA audio file requirementPhoto List menu options Viewing a Jpeg filesStill picture Skip ImagesView Slide Shows Photo file requirementSpeed option JpgAbout DVD recording Disc types and recording formats, modes, and settingsRecording time and picture quality This Recorder cannot record CD-R or CD-RW discsBasic Recording One-Touch Recording Instant Timer RecordingSimultaneous Play and Record Program Priority Timer-Link Recording External Timer RecordingChecking Timer Recording Details Timer RecordingCanceling a Timer Recording Timer Recording TroubleshootingDubbing from VCR to DVD Dubbing from DVD to VCRRecording from DV Input TroubleshootingBefore DV dubbing Recording from a Digital CamcorderTitle List and Chapter List Menu Overview EditingAdding Chapter Markers VR Mode Original and Playlist EditingChanging the Title Thumbnails Titles, Chapters and PartsAdding Additional Title / Chapters to the Playlist Making a New PlaylistDeleting a Part -RWVRRAM Deleting an Original or Playlist Title/ChapterYou can delete a part which you do not want in the title Select Edit Delete Part option then pressNaming a Title Disc MENU/LIST, Display Switches the keyboard typeTime Search Time menu appears on the TV screenHide a Chapter/Title Moving a Playlist ChapterProtect a Title Combining Two Chapters Divide One Title Into TwoYou can remove the Title List menu by pressing Stop Overwriting Recording +RWTo finalize a disc, refer to Finalize on Reference Language Code ListSymptom Cause Correction TroubleshootingSecurely Power of the equipment connected Recorder does Resetting the Recorder General SpecificationsRecording Accessory DVD SpecificationsInputs OutputsCprm IndexWarranty Only in U.S.A DR-MV80B
Top Page Image Contents