JVC LVT2013-001A manual Resetting the Recorder

Symptom	Cause	Correction
Can’t play disc recorded	The disc was recorded in Video mode.	Finalize the disc; see page 18.
on this Recorder on
	Some players will not play even a	No solution.
another DVD player.
	finalized disc recorded in Video mode.
	The disc was recorded in VR mode.	The other player must be RW
		compatible in order to play it.
	Discs recorded with copy-once materi-	No solution.
	al cannot be played on other players.
Cannot record or did	The remaining blank space on the	Use another disc.
not record successfully.	disc is insufficient.
	The source you are trying to record is	You cannot record the source.
	copy-protected.
	When recording to a Video mode disc,	Use a VR mode formatted disc for
	programs that are copy-once protect-	copy-once material.
	ed cannot be recorded.
Stereo Audio Record	TV is not Stereo-compatible.	No solution.
and/or Playback not
	Recorder A/V Out jacks are not	Make A/V connections. Stereo is avail-
present.
	connected to TV A/V In jacks.	able only via A/V output from Recorder.
	Recorder Audio/Video Out is not	Select AUX or A/V source as TV input.
	selected for viewing at the TV.
		.

Resetting the Recorder

If you observe any of the following symptoms...

•When the Recorder is plugged in, but the power will not turn on or off.

•When the display window is not working.

•When the Recorder does not operate normally.

You can reset the Recorder as follows:

•Press and hold the STANDBY/ON button for more than five seconds. This will force the Recorder to power off.

Press the STANDBY/ON button again to turn the Recorder back on.

•Unplug the power cord and then plug the power cord again after more than five sec- onds.

REFERENCE

45