JVC LVT2013-001A manual Recorder does

Symptom		Cause	Correction
The Recorder does	not	No disc is inserted.	Insert a disc or tape. (Check that the
start playback.		No tape is inserted.	disc or tape indicator in the display
			window is lit.)
		An unplayable disc is inserted.	Insert a playable disc. (Check the disc
			type and Regional code.)
		The disc is placed upside down.	Place the disc with the playback side
			down.
		The disc is not placed within the	Place the disc on the disc tray correctly
		guide.	inside the guide.
		The disc is dirty.	Clean the disc.
Video tape cannot	be	A cassette tape was inside already.	Eject the tape first and then insert the
inserted.			tape you want to use.
The Remote Control		There is an obstacle in the path of the	Remove the obstacle.
does not work properly.		Remote Control and this unit.
		The batteries in the Remote Control	Replace the batteries with new ones.
		are exhausted.
		The Remote Control is not pointed at	Point the Remote Control at the remote
		the remote sensor of the Recorder.	sensor of the Recorder.
		The Remote Control is too far from	Operate the Remote Control within
		the Recorder.	23ft (7m).
		This Remote Control use the same	When using a VCR, first press the VCR
		buttons for VCR and DVD functions	button. When using a DVD, first press
		(ex.PLAY).	the DVD button.
		The current remote control code dose	Identify the remote control code with
		not match the unit.	the code of unit (See page 8).
Camcorder image is		Camcorder is off.	Turn camcorder on and operate
not shown.			properly.
Camcorder image via		The recorder’s source is incorrect.	Use AUX to select input channel (AV1,
A/V input or DV IN to			AV2 or DV IN).
Recorder is not shown
on TV screen.
Timer recording is not		Clock in record is not set to	Set clock to correct time.
possible.		correct time.
		Timer has been programmed	Reprogram Timer.
		incorrectly.
		(TIMER Record) indicator light does	Reprogram Timer and turn the
		not appear after programming timer.	Recorder off to enable timer.

44