Appendix D

Troubleshooting

When you are on a CELLULAR call using the handset, your cell phone is in use. Attempting to use the cell phone for any other purpose may disconnect your call. You may need to connect the cellular phone to the telephone base manually to resume the connection, refer to page 18 for details.

I cannot find the AT&T DECT

6.0on my cell phone.

Make sure that the Bluetooth feature is turned on in the telephone base. Carefully follow the setup instructions on page 18.

Make sure that you manually set your cell phone to find or search for devices.

Turn off your cell phone, then turn it on again.

Reset the telephone base. Unplug the electrical power. Wait for approximately 15 seconds, then plug it back in. Repeat the above suggestions.

I don't know how to search for or add new devices on my cell phone.

Most cell phones have the Bluetooth feature in the connection or setup menus. Please refer to your cell phone user's manual.

In general, press the menu key on your cell phone, then look for the Bluetooth menu in the settings or connection menu. In the Bluetooth menu, select the option to search for or add new devices.

My cell phone disconnects from the telephone base.

Turn off your cell phone, then turn it on again.

Make sure that you are not using your cell phone when on a CELLULAR call.

When you are on a CELLULAR call using the handset, your cell phone is in use. Attempting to use the cell phone for any other purpose may disconnect your call. You may need to connect the cellular phone to the telephone base manually to resume the connection, refer to page 18 for details.

63

Page 68
Image 68
AT&T TL9178, TL91378, TL91178, TL91278 user manual Troubleshooting