AT&T TL91378 Chain dialing, Directory access while on a call, Last number redial while on a call

Telephone operation

NOTES:

1.You cannot edit a directory entry while you are on a call. For more details about the directory, seepage 41.

2.You cannot copy a caller ID entry into the directory while you are on a call. For more details about the caller ID history, see page 48.

3.If you press REDIAL/PAUSE while on a call, you can only view the most recent call, and you cannot erase the entry. For more details about the redial memory, see page 31.

4.Press and hold

OFF/CLEAR to exit redial, directory or caller ID history when you are on a call.

Chain dialing

Use this feature to initiate a dialing sequence from numbers stored in the directory, caller ID history or redial list while you are on a call. This feature is available only when you are making a HOME call.

Chain dialing can be useful if you wish to access numbers other than phone numbers (such as bank account information or access codes) from the directory, caller ID history or redial list.

Directory access while on a call

1.Press MENU/SELECT twice.

2.Press DIR / CID to scroll to the desired number.

3.Press MENU/SELECT to dial the number shown.

Caller ID history (call log) access while on a call

1.Press MENU/SELECT.

2.Press DIR / CID to scroll to >CALL

LOG.

3.Press MENU/SELECT.

4.Press DIR / CID to scroll to the desired number.

5.Press MENU/SELECT to dial the number shown.

Last number redial while on a call

Press REDIAL/PAUSE to show and dial the most recently dialed number. If you press REDIAL/PAUSE again within two seconds, the number is not dialed.

36