AT&T TL91278, TL9178, TL91378, TL91178 user manual Bluetooth setup, Pairing a device, Auto connection

Bluetooth

NOTE: You can only pair one Bluetooth cell phone with the telephone base at a time.

HANDSET 1

Bluetooth setup

To use a Bluetooth-enabled cellular phone with your telephone, you must first pair and connect your Bluetooth cellular phone with the telephone base.

Pairing a device

Before you begin, make sure that your Bluetooth- enabled cellular phone is not connected to any other Bluetooth device. Refer to your cellular phone user's manual to learn how to search for or add new Bluetooth devices.

To pair and connect a cellular phone:

1.Press and hold the Bluetooth button on the telephone base until it is flashing. The Bluetooth feature will be activated.

2.Using your cellular phone, turn on the Bluetooth feature and search for a new device.

3.Once your cellular phone has found the AT&T DECT 6.0 telephone base, select it.

4.Using your cellular phone, enter the PIN of the telephone base (the default PIN is 0000) to continue the pairing process.

When a device is successfully connected, the status icon will display on the cordless handset

screen, and the light of the Bluetooth button on the telephone base will be on steadily.

Auto connection

Once you have paired a device with the telephone base, the pairing information is stored in the telephone base. If the paired device becomes disconnected, the telephone base will automatically search and re-connect to that device. If the connection does not resume in a minute, you will need to re-connect to that device manually, refer to the section below for details.

18