Sim2 Multimedia HT300 XTRA-H installation manual

Page 4
SIM2 carries out comprehensive functional testing in order to guarantee the maximum product quality. For this reason, when you start using the product lamp operating hours may already be at between 30 and 60.

Fig. 1

Using the very latest in DLP™ technology, this projector has been designed specifically for high quality “Home Cinema” applications.

Sophisticated digital processing and a wide choice of inputs enable the connection of a variety of sources such as DVD players, analogue and digital VCRs, analogue and digital sa- tellite receivers and personal computers etc.

The long throw zoom lens allows the position of the projector to be located behind the viewer, thus reproducing a cinema-like installation (Fig. 2).

A sophisticated proprietary optical system, coupled with a hight performance zoom lens ensures hight contrast images, superior uniformity and edge-to-edge definition.

A new 6-segment colour wheel dramatically reduces the so called “rainbow effect” and gives a better contrast, better colorimetry and a lower black level to the image.

The DMD™ chip resolution identifies the projector: 1024x576 pixel for HT 280 model and 1280x720 pixel for HT 300 XTRA-Hmodel. For both models the high contrast ratio deliver on the screen an even more realistic image.

The renowned DCDi™ technology is adopted for deinterlacing: conversion from interlaced to progressive produces a smooth and natural image, without flickering, loss of vertical resolution and jaggedness along diagonal lines.

The low-noise ventilation system – with variable speed fans – ensures appropriate cooling and maximizes projector reliability.

To fully appreciate your new projector we recommend the use of a good quality screen and surround-sound system. Contact your nearest authorized SIM2 Multimedia dealer for further details.

SIM2 carries out comprehensive functional testing in order to guarantee the maximum product quality. For this reason, when you start using the product lamp operating hours may already be at between 30 and 60.

In addition to the regular tests, the Quality Control department performs additional statistical tests at the time of shipment.

In this case the packing may show signs of having been opened, and the accumulated lamp operating hours may be slightly higher than the hours associ- ated with the standard tests.

Fig. 2

DLP and DMD are registered trademarks of Texas Instruments. DCDi is a registered trademark of Faroudja, a division of Genesis Microchip, Inc.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC

2

Image 4
Contents User and Installation Manual The home theater projector HT 300XTRA-H HTBACK LIGHT 1 INTRODUCTION SIM2 carries out comprehensive functional testing in order to guarantee the maximum product quality. For this reason, when you start using the product lamp operating hours may already be at between 30 and 1 Projection lens 2 Lens shift knob 3 Cooling air inlet vents 2 IMPORTANT SAFETY INSTRUCTIONS Refer to trained, authorised personnel for technical assistanceDo not use the projector when the room temperature is above 35C 95F 3 PACKAGING AND CONTENTS 4 INSTALLATION ZOOM FOCUSFor rear projection the screen must be translucent 5 SWITCHING ON AND OFF THE PROJECTOR SWITCH ON FROM STAND-BYSWITCHING OFF AND RETURNING TO STAND-BY 6 CONNECTIONSLED INDICATORS COMPOSITE VIDEO INPUT S-VIDEO INPUTVGA INPUT RGB/YCRCB INPUTHDMI Fig. 21bMOTORISED PROJECTION SCREEN OUTPUT 7 KEYBOARD PAD RS232 INTERFACE CONNECTORUp/Down/Left/Right arrow keys Menufour 8 REMOTE CONTROLbatteries 9 ON SCREEN MENU SOURCE SELECTIONFig. 26a MAIN MENUPICTURE Fig. 28aFig. 28b BRIGHTNESSTABLE 1INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS CINEMA MODEVIDEO TYPE NOISE REDUCTIONIMAGE ASPECTCOLOR TEMPERATURE GAMMA CORRECTIONTABLE 2 INPUT SIGNALS AND ADJUSTABLE/SETTING ITEMS FREQUENCY/PHASEY / C DELAY SETUP ORIENTATIONHORIZONTAL/VERTICAL KEYSTONE LENSPOWER ON FACTORY DEFAULTSTEST PATTERNS MENU LANGUAGEF1/F2 KEYS Fig.36 MEMORIESImage Picture10 CLEANING AND MAINTENANCE No SignalCleaning the projector’s cover Cleaning the lens11 TROUBLESHOOTING GUIDE No power Green and red LED are OFFthe Image Adjustments menu The lamp is not coming on12 OPTIONAL ACCESSORIES OPTICAL HT A TECHNICAL SPECIFICATIONSOPTICAL HT 300 XTRA-H ELECTRICAL GENERALENVIROMENTAL CVBS on RCA/Phono type connectorB DIMENSIONS C PROJECTION DISTANCESFig.37a unit mm inches16/9 16/9 D ON SCREEN MENU LAYOUT Picture ImageYCrCb Video S-VideoSetup MenuVIDEO S-VIDEOMemories Save current settings Save initial settings Rename0 Auto 1 S MEMORY 2 S MEMORY 3 S MEMORYINDEX Phone +39.434.383.253-256 Fax +39.434.383260-261