Menu Configuration-MAIN Menu, Technical information

Menu Configuration—MAIN MENU

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

NOTE

•The menu automatically disappears in about 30 seconds after the last menu operation.

•Some items may not appear on the menu depending on the input or the input signal. These items are not available.

Technical information

Setting of “MARKER SELECT” and “R-MARKER SELECT”

The setting values and features are as follows.

OFF : “MARKER SELECT” and “R-MARKER SELECT” do not function.

LINE : Displays the area with an outline.

HALF : The area outside the specified aspect ratio of the screen is displayed as a 50% transparency.

HALF+L : The area of the specified aspect ratio of the screen is indicated by an outline, and the area outside of that is displayed as a 50% transparency.

BLK. : The area outside the specified aspect ratio of the screen is black. Only the portion of the picture within the designated area is displayed.

BLK. +L : The area of the specified aspect ratio of the screen is indicated by an outline, and the area outside of that becomes black so that only the area inside the line is displayed.

PICTURE IMPROVEMENT

Setting for the picture quality

Item	To do	Setting value
MOVING	Reduce the lag of moving pictures which is peculiar to LCD.	OFF, ON
PICTURE*1
APERTURE	Select the frequency of the luminance signal compensated in	OFF, LOW, HIGH
FREQ.*2	“APERTURE LEVEL.”
APERTURE	Compensate the frequency response of the luminance signal of the	01 – 10
LEVEL*2	video signal.
CTI*2	Adjust the clearness of the outlines of the chrominance signal.	OFF, NORMAL, HARD
LTI*2	Adjust the clearness of the outlines of the luminance signal.	OFF, NORMAL, HARD
sub menu	Display the sub menu which enables you to adjust the items of “PICTURE IMPROVEMENT” while
	viewing the actual picture.
reset	Restore the default settings for all the items in “PICTURE IMPROVEMENT.”

BACK LIGHT Setting value: –20– 00 – +20

Adjusts the brightness of the display.

DVI INPUT SEL. Setting value: AUTO, COMPO. (component), RGB

Selects the signal type you want to use for DVI-D (HDCP) terminal.

NOTE

•DVI-D input of the monitor is compatible with HDCP.

•Select “COMPO.” or “RGB” when the signal is not recognized correctly with “AUTO.”

COMPO./RGB SEL. Setting value: COMPO. (component), RGB

Selects the signal type you want to use for COMPO./RGB terminals.

AREA MARKER*2

Setting for AREA MARKER functions

Item	To do	Setting value
MARKER	Select the style of AREA MARKER whose aspect ratio is selected in “ASPECT	☞ “Technical
SELECT	SELECT.”	information”
ASPECT	Select the aspect ratio of AREA MARKER. You can display this AREA	4:3, 14:9, 13:9, 2.35:1,
SELECT	MARKER with AREA MARKER button on the front panel (☞ page 6) or by	1.85:1, 1.66:1
	using external control (☞ page 14).
SAFETY	Adjust the size of SAFETY AREA within the area marked with AREA MARKER.	OFF, 80% – 100%
MARKER	This AREA MARKER’s aspect ratio is selected in “ASPECT SELECT.”
R-MARKER	Select the style of AREA MARKER whose aspect ratio is selected in	☞ “Technical
SELECT	“R-ASPECT SELECT.”	information”
R-ASPECT	Select the aspect ratio of AREA MARKER. You can display this AREA	4:3, 14:9, 13:9, 2.35:1,
SELECT	MARKER by using external control (☞ page 14).	1.85:1, 1.66:1
R-SAFETY	Adjust the size of SAFETY AREA within the area marked with AREA MARKER.	OFF, 80% – 100%
MARKER	This AREA MARKER’s aspect ratio is selected in “R-ASPECT SELECT.”

NOTE

•To set up non-“R-” items, press AREA MARKER or SAFETY MARKER button. An external control system should not be operated at this time.

•Using the external control, you can select either “R-” items or non-“R-” items to activate (☞ “External Control” on page 14).

•When a picture is displayed in 4:3 aspect ratio, SAFETY AREA for the 4:3 area is displayed.

•To display SAFETY AREA for the area of a picture displayed in 16:9 aspect ratio, set “MARKER SELECT” and “R-MARKER SELECT” to “OFF.”

*1 DT-V24L1D and DT-V24L1 only *2 Memorized for each input.