 Monitor,  The power,  Working Environment

Maintenance

Monitor

1.Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage.

2.Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty.

3.Please don't touch the screen with your fingers, which would probably deface the screen.

4.Please don't press the screen; the LCD is extremely exquisite and flimsy.

The power

Please use the provided power adapter or the battery recommended by the manufacturer in order to avoid damage.

Please never use the light connector (2-pin, female) in right front of camera handle to power the monitor; otherwise it will damage the circuit of the monitor.

Please disconnect the power cable or take off the battery under the following situations:

1.If you do not operate this monitor for a period of time;

2.If the power cable or power adaptor is damaged;

3.If you operate this monitor by the methods different from this User Manual, and cause unknown problems;

4.If the monitor housing is broken.

Working Environment

1.Please don't lay this product on the unstable place.

2.Please don't lay this product in hot, cold or wet location.

 Cleaning

1.Please clean the screen with dry and downy cloth or special LCD cleanser.

2.Please do not press hard when cleaning the screen.

3.Please do not use water or other chemical cleanser to clean the screen. The chemical may damage the LCD.

4.For first time use, please tear off the factory LCD film. To protect the LCD screen, please post the LCD protection film offered in the package.