JVC DT-X71C, DTX71H Menu Operation, Picture Settings Submenu, System Configuration Submenu

3. Menu Operation

Press “MENU” and it will display menu system

Revolve “OK” to select an item. The selected item will be highlighted display.

Press “OK” to enter the selected item.

Under menu system, press “MENU” to back to previous menu.

The menu will automatically save and quit if it remains idle.

4. Picture Settings Submenu

The Picture Settings Submenu includes:

⑴CONTRAST: 0-100 value adjustment

⑵ BRIGHTNESS: 0-100 value adjustment

⑶ HUE: 0-100 value adjustment

(Only available under Composite input)

⑷ SATURATION: 0-100 value adjustment

⑸ SHARPNESS: 0-100 value adjustment

⑹ PIC.MODE: User defined and preset picture modes: standard, soft and vivid selection

5. System Configuration Submenu

The System Configuration Submenu includes:

⑴RATIO: Select “16:9” or “4:3” to adjust the aspect ratio.

⑵ SCAN: “UNDERSCAN” / “OVERSCAN” selection

⑶ ZOOM: “OFF”, “ZOOM1” and “ZOOM2” selection ZOOM1: Canon DSLR scale zoom-in ZOOM2: Pixel to Pixel zoom-in

⑷ MARKER: Select and set the safety mark scale from 80%, 85%, 90% and 95%.

⑸ FLIP: Select “YES” to enable G-sensor auto flip.

⑹ RESET: Revolve “OK” to RESET and press to recover all to factory setting.