Basic Configuration
•Log Configuration: In the Text Interface, this item provides access to a submenu which is used to configure the Audit Log, Alarm Log and Temperature Log as described in Section 5.3.3. In the Web Browser Interface, these parameters are directly accessed via the System Parameters menu.
Audit Log: When enabled, the Audit Log will create a record of all A/B switching at the
(Default = On without Syslog.)
Alarm Log: When enabled, the Alarm Log will create a record of all alarm activity at the
Temperature Log: When enabled, the Temperature Log will create a record of temperature vs. time at the
•Callback Security: Enables and configures the Callback Security Function as described in Section 5.3.4. In order for this feature to function, a Callback number must also be defined for each desired user account as described in Section 5.5. (Default = On - Callback without Password Prompt, 3 attempts, 30 Minute Delay.)
Notes:
•In the Text Interface, Callback Security Parameters are defined via a submenu of the Systems Parameters Menu, which is accessed via the Callback Security item.
•In the Web Browser Interface, Callback Security Parameters are defined via a separate menu, which is accessed by clicking the "Callback Security" link on the left hand side of the screen.
•Control Card A/B Switch: This item can be used to enable/disable the Master A/B Gang Switch on the
•Control Card Reset Switch: This item can be used to enable/disable the Reset Switch on the
•Modem Phone Number: When an optional external modem is connected to the
•Management Utility: Enables/Disables the Management Utility. When enabled, the Management Utility allows you to manage multiple WTI units via a single menu. For more information on the Management Utility, please refer to the Management Utility User's Guide on the CDROM included with the unit. (Default = Off.)
Note: Although the Management Utility can be enabled/disabled via either the Web Browser Interface and Text Interface, the Management Utility can only be accessed and operated via the Web Browser Interface.
•Scripting Options: Provides access to a submenu that is used to configure the Command Confirmation and Automated Mode parameters as described in Section 5.3.5.
Note: In the Text Interface, the Scripting Options submenu is accessed via item 13. To access the Scripting Options parameters via the Web Browser Interface, place the cursor over the "General Parameters" link, wait for the flyout menu to appear, then click on the "Scripting Options" link.
