Basic Configuration
Circuit Access: Selects the default Circuit Access setting for new TACACS users. The Circuit Access setting determines which Circuit Module(s) each account will be allowed to control. (Defaults; Administrator and SuperUser = All Circuits On, User = All Circuits Off, ViewOnly = All Circuits Off.)
Notes:
•Administrator and SuperUser level accounts always have access to all circuits.
•User level accounts will only have access to the circuits that are defined via the "Circuit Access" parameter.
•ViewOnly accounts are not allowed to invoke switching commands.
Circuit Group Access: Selects the default Circuit Group Access setting for new TACACS users. For more information on Circuit Groups, please refer to Section 5.6. (Defaults; Administrator and SuperUser = All Circuit Groups On, User = All Circuit Groups Off, ViewOnly = All Circuit Groups Off.)
Notes:
•In order to use this feature, Circuit Groups must first be defined as described in Section 5.6.
•Administrator and SuperUser level accounts will always have access to all Circuit Groups.
•User Level accounts will only have access to the Circuit groups that are defined via the Circuit Group Access parameter.
•ViewOnly accounts are not allowed to invoke switching commands.
Service Access: Selects the default Service Access setting for new TACACS users. The Service Access setting determines whether each account will be able to access command mode via Serial Port, Telnet/SSH or Web. In addition, the Service Access setting also determines whether each account will be able to employ the Outbound Access function. For example, if Telnet/SSH Access is disabled, then the default setting for new TACACS accounts will not allow access to command mode via Telnet or SSH. (Default = Serial Port = On, Telnet/SSH = On, Web = On.)
Note: If Outbound Access has been disabled via the Network Parameters menu, then the Service Access parameter will not be allowed to grant Outbound Access to new TACACS users.
