
Getting Started
3.4.2.Fallback Switching - Web Browser Interface
In the default state, the Web Browser Interface will not be available until you have enabled Web Access as described in Section 5.9.2. After Web Access has been enabled, access the
1.Access the Circuit Control Menu: Click on the "Circuit Control" link on the left hand side of the screen to display the Circuit Control menu. The Circuit Control menu includes a series of dropdown menus that are used to select the desired switching action for each Circuit Module.
Note: The Circuit Control menu also lists the number and
2.Select the Switching Action: Use the dropdown menu to select an A/B switching operation for the desired Circuit Module. For example, to switch Circuit 1 to the B position, click on the down arrow in the "Action" column for Circuit 1 to display the dropdown menu, select the "B" option from the dropdown menu and then click on the "Confirm Circuit Actions" button.
Notes:
•The dropdown menu for each circuit allows you to select position A, position B or the default position. Normally, the "Default" option will switch the circuit to the
•The Circuit Control Menu also includes the ability to switch all
3.Confirm Switching Actions: After you click on the "Confirm Circuit Actions" button, the
4.The
This completes the Quick Start procedure for the