JVC DT-X71C, DTX71H, DT-X71F user manual DT-X71H

Page 8

DT-X71H

Front view

PHONE: Earphone jack

POWER: Power on/off

Connect with power cable or mount battery, press the “POWER” and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off.

Remark: Disconnect with power cable or take off the battery if the monitor will not be used for a period of time.

VIDEO: Press to switch the input signal to Composite video

HDMI: Press to switch the input signal to HDMI

HD-SDI1:Press to switch the input signal to the first HD-SDI channel

HD-SDI2:Press to switch the input signal to the second HD-SDI channel

MENU: Press to enter Menu

F1: User definable function key 1

F2: User definable function key 2

RATIO: 16:9 and 4:3 switch

ZOOM: Picture Zoom-in

Press “ZOOM” to switch ZOOM1: Canon DSLR scale zoom-in, and ZOOM2: pixel to pixel zoom-in. DISPLAY: Display current settings

Press “Display” to display safety mark, title and the current input signal information OK: Select and Apply

Under menu system, revolve “OK” to adjust settings and press to apply; and out of menu system, directly revolve “OK” to adjust volume.

TALLY Light: Red, Green and Yellow 3-color TALLY indicator

Image 8
Contents DT-X71C Hdmi Preface  The power  Cleaning Monitor  Working EnvironmentFeatures Panel Instruction Image FlipDT-X71F Front view⑶ Battery mount Rear viewInput formats ⑻ Tally controlling port RJ45DT-X71H ⑻ Tally controlling port DT-X71C ⑵ Battery mount ⑺ Tally controlling portMenu Operation Picture Settings SubmenuSystem Configuration Submenu Display Settings Submenu OSD Settings SubmenuTitle Settings Submenu Function KEY Settings Submenu DT-X71F DT-X71HDT-X71C Tally Light OperationSpecifications Packing ListLCD Performance Video FormatSwit Electronics USA, LLC