JVC PD-35DX, PD-42DX manual Connecting devices to the OUT terminal, Connecting headphones

Page 41

Connecting devices to the OUT terminal

The signals of the images and sound you are currently viewing with this TV are output through the OUT terminal. By connecting a VCR to the OUT terminal, you can record the currently shown image and sound to that VCR. To do this, connect the VCR and OUT terminal following the steps below.

1Connect the VIDEO in the OUT terminals and the VCR’s VIDEO IN (video input) terminal with a video cable

2Connect the AUDIO (L and R) in the OUT terminals and the VCR’s AUDIO IN (audio L/R input) terminals with an audio cable

•When you turn off the TV, the signals from the OUT terminal are also turned off.

•No signal is output when VIDEO-4 is chosen.

Connecting headphones

Connect the headphones with a stereo mini-jack (of 3.5 mm in diameter) to the headphone jack at the receiver.

•The headphone volume is adjusted with the “HEADPHONE” menu (see page 29).

Connecting Speakers/Amplifier

See the Audio equipment connection diagram, then connect the audio equipment you desire to the TV.

You can use external front speakers to listen to the TV sound instead of the TV speakers.

Before connecting anything:

•Read the manuals provided with the amplifier and speakers.

•Turn the TV and amplifier off.

•To prevent magnetism from the speakers adversely affecting the TV screen, use magnetically-shielded speakers for the front speakers.

•Note that connecting cables are not supplied.

Back of the receiver	L	R
VIDEO
L
DEO-4)
R

YAUDIO OUT

1Amplifier

2External speakers (Magnetic-shielded type)

•The output from the AUDIO OUT terminal is not interrupted by headphone connection to the TV. You cannot cut the sound from the front speaker even if you connect a headphone to the TV.

•Adjust the volume of the external speakers with the amplifier.

Additional preparation

ENGLISH

39

Image 41

Contents PD-42DX PD-35DX Page English Burn-in „ Do not view for long periods of time in the Regular modeAvoid burn-in as follows If Burn-in has occurredDamage to the television or remote control Failure to take the following precautions may causePoint defects Effect on infrared devicesContents Checking contents of packages „ Mounting the front speakers Setting up your TVMounting the front speakers, and preparing the subwoofer Putting the batteries into the Remote control InstallationInstallation example „ Preparing the subwooferConnections Connection diagramPD-35DX „ Connecting the speaker cord to the subwoofer terminal Connecting the front speakers and subwoofer„ Connecting the speaker cord to the front speaker terminal Disconnecting the system cable Connecting the TV and receiver„ Bundling speaker cords PD-42DX PD-35DXFig.A Connecting the aerial and VCRBack of the receiver Connecting the power cord to the AC outlet„ Receiver rear Initial settings TV buttons and functions Turn the TV on or off from standby mode Remote control buttons and functions„ Use the number buttons „ Use the 6buttons„ Use the obutton „ Use the PR List„ Use the 6 buttons „ Muting the soundZoom function Cinema Surround function Using the Freeze functionDisplaying the current time Return to TV channel instantlyCancelling the PIP function Using the PIP functionPress the Pbutton Swapping the main-picture and sub-pictureOperating a JVC brand VCR or DVD player Using the MULTI-PICTURE functionVCR DVDTeletext function Using the List ModeBasic operation HoldSub-page CancelReveal SizeUsing the TV’s menu White Balance Picture ModePicture Adjustment Super DigiPure Digital VNRMIN MAXPull Down Colour SystemAuto Aspect Colour ManagementPIP Position PIPMULTI-PICTURE Press the 6 buttons to choose PIP. Then press the abuttonStereo / I BBECinema Surround SubwooferPress the abutton Hint SUBChoose a Video terminal ID ListTo erase a name assigned to the Video terminal Choose a blank spaceBlue Back Sleep TimerChannel Guard „ To view a locked TV channelPress the Number buttons to enter the ID number Snow NoiseIf you have forgotten the ID number Choose Snow Noise Press the abuttonAuto Program LanguageEDIT/MANUAL Choose Auto PROGRAM. Then press the a buttonMove „ IDInsert Manual Delete Press the yellow button to delete the TV channel To cancel the Manual function Sound system Area Country or region System Press the green or red button to search for a TV channelGroup Languages Changing the Teletext Language settingBefore connecting anything Connecting the external devicesAdditional preparation Front of the receiver„ Connecting Speakers/Amplifier „ Connecting devices to the OUT terminal„ Connecting headphones Channel from this table CH/CC numbersTroubleshooting „ Other concerns Design and specifications subject to change without notice SpecificationsEnglish Page Victor Company of JAPAN, Limited