Disconnecting the Computer

If the computer is docked in an Compaq Expansion Base or Compaq Convenience Base, refer to the "Undocking the Computer" section. If the computer is not docked in an Compaq Expansion Base or Compaq Convenience Base, refer to Figure 5-5 and follow these steps to disconnect the computer:

1.Shut down the computer.

2.Close the computer.

3.Position the computer so the rear panel faces forward.

4.Disconnect the power cord from the wall outlet 1 .

5.Disconnect the power cord from the computer 2 .

Figure 5-5.Disconnecting the Computer

6. Turn off and disconnect external devices.

Removal and Replacement Procedures 5-5