Advanced Menu
Begin here | To do this |
Language (or press F2) | Change the Computer Setup language. |
Boot Options | Enable/disable |
| QuickBoot, which starts the computer |
| more quickly by eliminating some startup |
| tests. (If you suspect a memory failure |
| and want to test memory automatically |
| during startup, you may want to disable |
| QuickBoot.) |
| MultiBoot, which enables you to set a |
| startup sequence that can include any |
| drives in the system. |
|
|
Device Options | ■ Enable/disable the embedded numeric |
| keypad at startup. |
| ■ Enable/disable multiple standard |
| pointing devices at startup. When this |
| feature is disabled, only one pointing |
| device is activated at startup. |
| ■ Enable/disable USB legacy support for |
| one USB mouse and one USB keyboard. |
| (When USB legacy support is enabled, |
| the keyboard and mouse work without a |
| loaded USB driver.) |
| ■ Set an optional external monitor or |
| overhead projector connected to a video |
| card in a docking base as the primary |
| device. (When the computer display is |
| set as secondary, the computer must be |
| shut down before undocking.) |
| ■ Set |
| |
| Change the parallel port mode to or from |
| EPP, standard, bidirectional, or ECP. |
Troubleshooting
