4.Remove the screw that secures the memory expansion compartment cover to the computer 1 (Figure 5-24).

NOTE: If the computer was shipped with a preinstalled memory expansion board, the cover is attached with a tamper-resistant Torx T-10 memory security screw. Use the Torx T-10 screwdriver included with the computer to remove and reinsert this screw.

If the computer was not shipped with preinstalled memory expansion boards, the cover is attached with a standard Torx T-8 screw. Use a Torx T-8 screwdriver to remove and reinstall the screw.

5.Slide the cover to the left 2 and lift the left edge up to remove it.

Figure 5-24.Removing the Memory Expansion Compartment Cover

5-28Removal and Replacement Procedures