JVC PD-42X795 manual Connecting to a Camcorder, Connecting to an External Amplifier

Quick Setup Connections

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions.

S-VIDEO

VIDEO AUDIO

OVER L/MONO R

-

CAMCORDER

OR

Receiver front Panel

1)Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on the front of the receiver, OR connect an S-Video cable from the front of the receiver to the camcorder.

2)Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on the front of the receiver.

3)Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on the front of the receiver.

Note:

•If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the LEFT AUDIO IN on the front of the receiver.

Connecting to an External Amplifier

Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home theater system. Simply connect the subwoofer to the back of the receiver.

Receiver Rear Panel

AUDIO			SUB WOOFER
OUT			OUT
R	AUDIO	L	VIDEO
			S-VIDEO
		MONITOR / REC OUT

Powered

Subwoofer

SpeakerSpeaker

Amplifier

1)Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the receiver to the LEFT AUDIO INPUT on the amplifier.

2)Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the receiver to the RIGHT AUDIO INPUT on the amplifier.

3)Connect a black composite cable from the SUBWOOFER OUT on the back of the receiver to the LINE INPUT of the subwoofer.

Notes:

•Refer to your amplifier’s manual for more information.

•You can use AUDIO OUTPUT for your home theater system.

22