JVC PD-42X795 manual Troubleshooting, Following are not malfunctions

Page 87

		Troubleshooting


	PROBLEMS	CHECK

	There is no sound	• The Center CH Input may be turned on. See page 57.
	from the TV's	• The TV Speaker option may be turned off. See page 56.
	speaker

	Static electricity	• It is normal to feel static electricity if you brush or touch the screen.

	You hear occasional	• It is normal for the TV to make crackling sounds when first turned on or off. Unless
	crackling sounds	the sound or picture become abnormal, this is fine.

	The AUTO DEMO	• The TV recieved a signal from the AV CompuLink
	finished automatically	• The On Timer that you programmed has started.
		• The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip.
		• The Auto Shut Off that you programed has occured.

	It does not operate	• Press the CHANNEL- and VOLUME- buttons on the front panel of the TV simultaneously
	correctly	for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug
		the power cord and plug it back in.

The following are not malfunctions.

•The television may make a creaking sound if the temperature of the room or the temperature of the inside of the television changes. If there is no problem with the screen or sound, then there is no need to worry.

•Although the picture may be temporarily disturbed and noise may be seen on the screen if the power is turned on immediately after it has been turned off, this is not a malfunction.

•If the television is used at a location above 2,000 m, a buzzing noise and image distortion may occur. This phenomenon is peculiar to PDP (Plasma Display Panel), and could occur with any television using PDP. It is not a malfunction.

87

Image 87

Contents Plasma Display Users Guide Risk of Electric Shock Do not Open Important Safety PrecautionsImportant Safety Instructions FCC Notice Do not view for long periods of time in the Regular mode Screen Burn-inAvoid burn-in as follows Caring for the Screen Caring for the CabinetTable of Contents Cable Card Information Digital SetupDigital Button Functions OSD InformationQuick Setup Unpacking your TV Quick Setup Attaching the stand to the TV Receiver Front Display FrontQuick Setup TV Remote Control Getting Started Set up your TVReceiver rear Connecting the TV and ReceiverDisconnecting the system cable Connecting the power cord to the AC outletKey Feature Buttons Remote ControlBasic Operation Receiver front Display frontVideo Cable Component Cables Composite Cables Audio Cables Connecting Your DevicesVCR Connection Diagram #1VCR Diagram #2Connecting to Monitor/Recording Output Terminal AV CompuLink Cable Connecting to JVC AV Compu LinkConnecting to an External Amplifier Connecting to a CamcorderConnecting to an amplifier using your optical output Connecting to the Surround AmplifierLooking at the images from a computer Connecting to the computerWhen a picture is not displayed Table of signals for each type of computerDTV Decoder Hdmi to DVI Cable Connecting to a Digital TV ReceiverDigital OUT Connecting to an Hdmi Compatible DeviceReceiver Rear Panel Receiver Rear Panel Language To beInteractive Plug In Menu Manual Clock Set Auto Clock SetNOW Programming Auto Tuner SetupSetting the CATV, VCR and DVD Codes Remote ProgrammingCable Box or Satellite Codes MGA VCR CodesSMC DVD CodesSearch Codes Cable/Satellite Search Codes FunctionVCR/DVD Search Codes Function Onscreen Menus Using the GuideSelected Option Blue Onscreen Menu SystemOnscreen Menu System Selected Option GreenTo Initial Setup Auto Tuner Setup Initial SetupDigital Channels Channel SummaryContinue to follow these directions for all four spaces Chip Channel Guard MessageDirections to Block Unrated Programs Unrated ProgramsUS V-Chip Ratings Directions to set US V-Chip Ratings Setting US V-Chip RatingsDirections to set Movie Mpaa Ratings Movies RatingsSet Lock Code Auto Demo Image ShiftLanguage Analog Setting Digital Auto SettingClosed Caption Digital Manual Setting Noise Muting Auto Shut OffV1 Smart Input Front Panel LockVideo Input Label Position Adjustment Power IndicatorVideo-1 Monitor Out Digital-In ON, make sure that the TV volume level is low! IfTV Speaker Audio OutCenter CH Input Digital-In AudioColor Temperature Picture AdjustPicture Settings Adjust the Picture SettingsDigital Noise Clear Color ManagementDynamic Gamma Burn-in Image Reducer ResetSound Adjust Sound SettingsAdjust the Sound Settings Set Clock Clock/TimersOn/Off Timer Button Functions Multi Screen FunctionTwin Select IndexFreeze SwapInput PowerNumber Buttons 10Key Pad TuneSound Return +/TVMuting Video StatusNatural Cinema Sleep Timer Message Sleep TimerVolume + DisplayChannel + Favorite Register the favorite channelDelete the favorite channel Aspect Ratios AspectBack MenuDVD Buttons TV/CATV Slide SwitchVCR/DVD Slide Switch VCR ButtonsAntenna Level Digital SetupAspect Ratio Digital SoundSoftware Update Cable Card ApplicationLink Auto Play Digital Button Functions Digital CH D/A Digital/AnalogSub Channel Controller Link MenuTo operate, select a device DeviceReservation TimerTimer Edit Timer EditionTimer Deletion Guide Cancel the timer recordingOSD Information Weak SignalCable Card Connection Cable Card InformationProblems Check TroubleshootingFollowing are not malfunctions TroubleshootingPage Page Specifications subject to change without notice SpecificationsPage JVC Company of America JVC CANADA, INC