JVC LV42740-001A manual To connect to audio equipment with a digital input

To connect to audio equipment with a digital input

Getting started

English

You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an amplifier, MD, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound.

When you make the digital connection, we recommend also to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.

The unit

AUDIO OUT

	CENTER	SUBWOOFER
DIGITAL OUT	REAR		VIDEO OUT		AV COMPU LINK
PCM / STREAM			VIDEO
	RIGHT	LEFT
COAXIAL OPTICAL
	FRONT		COMPONENT
			Y	PB	PR
	RIGHT	LEFT
			S-VIDEO
	Red	White

Optical digital cable (not supplied)

Getting started

Coaxial digital cable
(not supplied)	Digital equipment
Audio cable (supplied)	White	IN	IN
		LEFT	OPTICAL
		AUDIO	DIGITAL
	Red	RIGHT	COAXIAL

The OPTICAL jack is protected by the hinged cover. To connect the optical cable to the jack, press the cover with the plug and connect it to the jack inside in the correct direction.

•For digital connection, connect the unit's DIGITAL output (OPTICAL or COAXIAL) to the digital input of an audio equipment using an optical or a coaxial digital cable.

NOTES

•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “PREFERENCE 2” on-screen display correctly according to the connected audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to them. See “DIGITAL AUDIO OUTPUT” on page 59.

•When you connect the unit's DIGITAL output to a Dolby Digital or DTS decoder (or amplifier with a built-in decoder) to enjoy surround sound, the unit's “COMPRESSION” setting in the “PREFERENCE 2” on-screen display and all settings in the “SPK. SETTING” display are invalid. Make appropriate surround audio settings by the decoder.

21