Runco Q-750I operation manual Controls and Functions, 750i at a Glance

Page 21

2. Controls and Functions

Figure 2-1shows the key Q-750i components.

Top IR Sensor

Intake Vent (on side)

Runco Logo

Focus Ring

Projection Lens

Front Bezel

Retaining

Screw

Zoom Ring

Status LED

Exhaust Vent

Front IR Sensor

Figure 2-1. Q-750i Front/Side/Top View

•TOP IR SENSOR

Receives infrared signals from the remote control unit.

•INTAKE VENT

Internal fans draw cool air into the projector through this vent.

•RUNCO LOGO

The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) or upright. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees.

•FOCUS RING

Rotate this to focus the projected image.

•PROJECTION LENS

Available in two versions: standard throw range (1.85:1 to 2.40:1) and short throw range (1.56:1 to 1.86:1).

•FRONT BEZEL RETAINING SCREW

Loosen this screw to allow removal of the decorative front bezel, which provides access to the lens shift controls (refer to Lens Shift on page 34).

•ZOOM RING

Rotate this to change the projected image size.

2.1

Q-750i at a Glance

Q-750i Series Installation/Operation Manual

5

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 750i 750i/CineWide 750i/CineWide with AutoScope 750i SeriesPage RuncoCare Standard Features RuncoCare Standard Two Year Limited WarrantyRuncoCare Claim Procedure Page Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part Page Table of Contents Operation Maintenance and TroubleshootingSerial Communications SpecificationsTable of Contents Xiv List of Figures CIE 1931 Color Coordinate Diagram and Effect of PCE Hue About This Manual IntroductionIf you need Turn to Using This ManualFormat screen Description, Features and BenefitsOptional Accessories 750i at a Glance Controls and FunctionsOff = Normal operation 750i Rear PanelComponent 1/SCART RCA connectors Trigger 2 3.5-mm, mini phono jackRS-232 Q-750i Remote Control 750i Remote ControlOn / OFF Picture Adjustment Buttons BRT BrightnessSource Selection Buttons VID S-VideoAspect Ratio Selection Buttons Memory Preset Buttons169 Lbox LetterboxRemote Control InstallationInstallation Overview Quick SetupProcedure For Details, Refer to If installing a CineWide-equipped projector InstallProjector Installation Options Installation ConsiderationsInstallation Type Ambient LightThrow Ratios for the Q-750i Series PrimaryLens Screen Lens Only Anamorphic Minimum Maximum Ceiling Installation Floor InstallationVertical and Horizontal Position Lens Shift Vertical and HorizontalHorizontal Lens Shift Example Only Folded Optics With Installing the Fixed CineWide Base Plate Installing the Optional CineWide/AutoScope Lens MountLens Motor Installing the AutoScopeRemove Projector Front Feet Q750i with Ceiling Mount Adapters/Projector Stands Install Lens MotorAutoScope Lens Motor Installation CineWide Base Plate Installing the FixedDo not use the mounting screws provided with the ceiling Mounting the Q-750i Connections to750i Connecting Source Components to the Q-750iHDMI/DVI Connections See Figure 11. RGB Connections 12. Component Video Connections DTV Set-Top Box or Other Component YPbPr Source13. Composite and S-Video Connections Connection RS-232 ControllerTrigger Output to External Connecting 12-VoltTheater Equipment AutoScope Lens MotorConnecting an External IR Connecting to AC PowerReceiver Turning on the Power Primary Lens Adjustments Zoom Out FocusVertical Lens Shift To shift Rear Projection Ceiling Mode Changing the OSD Language Adjusting the Picture OrientationIt is extremely important that the primary lens is properly Installing and Adjusting the CineWide Anamorphic Lens18. Attaching the Anamorphic Lens to the Lens Ring Adjusting the Horizontal X Lens Position Too Far Left Correct position Too Far Right Anamorphic Lens Top View Geometry Installation Operation Using Picture-In-Picture PIPSelecting An Input SourcePIP Input Source Available Main and PIP Source CombinationsUsing the On-Screen Menus Q-750i Main Menu Aspect Ratio Settings 169Letterbox Virtual Cinema You must enter a passcode to access the Save ISF Typical Pluge Pattern for Adjusting Brightness Typical Test Pattern for Adjusting Sharpness Overscan Examples Input Select Sub-Menu Q-750i Advanced Menu AdvancedPCE Color Gamut setting refer to Color Gamut, below Color X/y Color Gamut ValuesRGB Adjust Sub-Menu 10. Fine Sync Sub-Menu 11. PCE Sub-Menu Hue Hue Saturation13. Q-750i System Menu 14. Input Enable Sub-Menu PBP1 PBP2 16. PIP Split-Screen Mode Operation Language 17. Q-750i Service Menu OSD menus are not available when in test pattern mode Operation Troubleshooting Tips Maintenance and TroubleshootingTroubleshooting Chart Symptom Possible Causes SolutionMaintenance and Troubleshooting Serial Communications Key CommandsIR Code Serial Command Key Names and IR CodesKeyname Remote ButtonRemote Button Description Keyname IR Code RS232 Remote Button Description Keyname Operations Control Commands Function DescriptionOperation Commands Values Serial CommandsPip.select = ? Red.off = ? + Key = ? Blue.only White.red.gain = ? + RS-232 Error Codes RS-232 Error CodesError Code LED Indication Description Serial Communications Specifications 750i SpecificationsQ-750i Specifications Industry-Standard Specifications Home Theater Calibration SpecificationsPower Requirements DimensionsOverall Dimensions Q-750i Overall Dimensions Q-750iOverall Dimensions Q-750i/CineWide with AutoScope Overall Dimensions Q-750i/CineWide with AutoScopeSupported Timings Supported Signal Timings by InputPAL-B/G Page 020-1018-00 Rev. a October

Q-750I specifications

The Runco Q-750I is a state-of-the-art home theater projector that has earned a reputation for delivering exceptional image quality and advanced features. Designed to cater to the needs of cinephiles and home theater enthusiasts alike, the Q-750I incorporates a range of technologies that elevate the viewing experience to new heights.

One of the standout characteristics of the Runco Q-750I is its use of cutting-edge DLP technology. The projector employs a BrilliantColor™ technology that enhances the color accuracy and brightness, delivering vivid and realistic images. With a native resolution of 1080p, it ensures that even the smallest details in high-definition content are rendered crisply and clearly.

In addition to its impressive resolution, the Q-750I also features an advanced optical system. The projector's lens system, which includes multiple lens elements, ensures minimal distortion and superior image sharpness across the entire screen. This attention to detail means that viewers can enjoy an immersive cinematic experience without compromising on image quality.

The Q-750I also stands out with its extensive installation flexibility. With a motorized lens shift feature, users can easily adjust the projector's position to fit various screen sizes and setups. This aspect, combined with a robust zoom capability, allows for seamless integration into any home theater design.

Another significant feature of the Runco Q-750I is its support for 3D content. With the increasing popularity of 3D films and gaming, the Q-750I can project stunning three-dimensional visuals, providing an engaging experience that makes viewers feel part of the action. It is compatible with the latest 3D formats, ensuring that users can enjoy their favorite content without any compromise.

Moreover, the projector is equipped with Runco's proprietary Vivix™ video processing technology. This advanced processing system enhances the quality of both standard and high-definition content, optimizing color, contrast, and motion handling. The result is a smoother and more lifelike viewing experience, particularly in dynamic scenes.

On the connectivity front, the Q-750I is well-equipped with multiple input options, including HDMI, Component, and RS-232 for integration with control systems. This ensures compatibility with a wide range of devices, making it a versatile choice for any home theater setup.

In summary, the Runco Q-750I is a feature-packed projector that combines high-end technologies with user-friendly design. Its impressive image quality, installation versatility, and support for 3D content make it an ideal choice for anyone looking to create a truly immersive home theater experience. As technology continues to evolve, the Q-750I stands out as a premium option for discerning viewers who demand the best in home entertainment.
Top Page Image Contents