Runco LS-7 operation manual Turning on the Power 3.7 Lens Adjustments, Connecting to AC Power

Page 43

Connecting to AC Power

Installation

The LS-7 ships with various types of AC power cords. Choose the one that is appropriate	Connecting to AC Power
to your locale.

Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V); see Figure 2-3.Then, connect the other end to your AC power source.

1. Turn on your source components.

ON

2. Press the ON l button on the remote control to turn on the LS-7. The LED flashes green to indicate that it is warming up.

3. When the projector is ready for use, the LED turns off.

The LS-7 gives you a great deal of control over the picture size, position and focus.

To access the motorized lens focus control, do either of the following:

•Press MENU on the remote control. Select Control from the Main Menu, then press or to highlight Lens Control. Press or to highlight Focus and press ENTER.

•When no menu is present on-screen, press ENTER () on the system keypad or remote control unit.

Then, use the button to focus the projected image nearer or the button to focus the projected image farther away.

To access the motorized lens zoom control, do either of the following:

•Press MENU on the remote control. Select Control from the Main Menu, then press or to highlight Lens Control. Press or to highlight Zoom and press ENTER.

•When no menu is present on-screen, press ENTER () on the system keypad or remote control unit twice.

Then, use the button to make the picture larger (zoom in) or the button to make the picture smaller (zoom out).

To access the motorized lens shift control, do either of the following:

•Press MENU on the remote control. Select Control from the Main Menu, then press or to highlight Lens Control. Press or to highlight Lens Shift and press ENTER.

•When no menu is present on-screen, press ENTER () on the system keypad or remote control unit three times.

Then, use the and buttons to adjust the vertical lens position or the and buttons to adjust the horizontal lens position.

3.6

Turning on the Power

3.7

Lens Adjustments

Focus

Zoom

Lens Shift

Runco LS-7 Installation/Operation Manual

27

Image 43

Contents Home Theater Projector LS-7Page Length of Warranty RuncoCare Standard Two Year Limited WarrantyRuncoCare Standard Features Warranty CoverageWarranty Exclusions RuncoCare Claim ProcedureOnline Product Registration Extended Service OptionsLimitation of Implied Warranties Effect of Local Law Exclusion of DamagesCOPYRIGHT AND TRADEMARKS Important Safety Instructions DECLARATION OF CONFORMITY Compliance InformationIMPORTANT RECYCLE INSTRUCTIONS FCC PARTINDUSTRY CANADA ICES-003 PRODUCT DISPOSALPage RuncoCare Standard Two Year Limited Warranty Table of Contentsviii Floor Mounting Upright RS-232Error Codes Serial Command SyntaxKey Commands Operations CommandsTable of Contents List of Figures List of Figures If You Have Comments 1. Introduction1.1 About This Manual Target AudienceDANGER 1.2 Using This ManualOptional Accessories 1.3 Description, Features and BenefitsKey Features and Benefits Parts List Introduction MENU 2. Controls and Functions2.1 LS-7at a Glance SOURCEFRONT IR SENSOR EXHAUST VENTINTAKE VENT PROJECTION LENS3.LAMP MODULE COVER 6.ADJUSTABLE FEETFigure 2-2. LS-7Rear/Bottom/Top View 1.RUNCO LOGO BADGE 2.REAR COVER1.HDMI 1 Digital HDMI 2 Digital 5.COMPONENT 1/SCART RCA connectors2.2 LS-7Rear Panel Figure 2-3. LS-7Rear Panel9.TRIGGER 2 3.5-mm,mini phono jack 2.3 LS-7Remote Control7.S-VIDEO 8.IR INPUT5.Aspect Ratio Selection Button 7.Memory Preset Buttons M1 / M2 / M38.Picture Adjustment Buttons Contrast Sharpness SHARP Press to adjust sharpnessNotes on Batteries 3. Installation3.1 Remote Control Notes on Remote ControlInstallation Figure 3-1.IR Reception Angles90.0 Table 3-1.Installation Overview 3.2 Quick SetupInstallation Considerations InstallationTable 3-2.Projector Installation Options Installation TypeEstimating Throw Distance Ambient LightThrow Distance Figure 3-2.Estimating Throw DistanceVertical and Horizontal Floor InstallationFigure 3-3.Projector Placement Table 3-3.Throw Ratios for the LS-7SeriesFigure 3-4.Vertical Lens Shift Example Only Lens ShiftInstallation Figure 3-5.Horizontal Lens Shift Example OnlyFigure 3-6.Folded Optics Adjusting the Projection3.4 Mounting the LS-7 Folded Optics3.5 Connections to the LS-7 Figure 3-7.HDMI/DVI Source Connections Connecting SourceComponents to the LS-7 HDMI/DVI Connections See FigureFigure 3-8.RGB Connections Y Pb Pr Y Pb Pr DTV Set-TopBox or Other Component YPbPr SourceFigure 3-9.Component Video Connections InstallationInstallation Figure 3-10.Composite and S-VideoConnectionsDVD Player, VCR Satellite Receiver Laser Disc etc Figure 3-11. RS-232Control System Connection to Automation/ Control System or PCRS-232Controller ConnectionTheater Equipment Connecting 12-VoltConnecting an External IR Trigger Output to ExternalConnecting to AC Power 3.6 Turning on the Power 3.7 Lens AdjustmentsFocus Zoom Lens Shift Installation 3.8 Changing the OSD Languageshift exceeds 50 per cent of the screen height Rear Projection Ceiling Mode 3.9 Adjusting the Picture OrientationInstallation 4.3 Selecting An Input Source 4. Operation4.1 Selecting Video Memory 4.2 Selecting an Aspect Ratioseparated by their display modes 4.4 Using Picture-In-PicturePIP4.5 Using the On-ScreenMenus Figure 4-1. LS-7OSD Menu Structure ServiceMain AdvancedFigure 4-2. LS-7Main Menu MainTable 4-2.Aspect Ratio Settings Operation Table 4-2.Aspect Ratio Settings continuedOperation Table 4-2.Aspect Ratio Settings continuedAspect Note sub-menu You must enter a passcode to access the Save ISFBelow Black Above Black Operation Operation Figure 4-6.Overscan Examples Operation Figure 4-7. Source Select Sub-MenuFigure 4-8. LS-7 Advanced Menu AdvancedStandard for your region Table 4-3.x/y Color Gamut Values Offset settings reduce the image brightness Figure 4-9. RGB Adjust Sub-MenuOperation Figure 4-10. Fine Sync Sub-MenuOperation Figure 4-11. LS-7 System Menu SystemFigure 4-12. Source Enable Sub-Menu DMD Area Figure 4-13.PIP and PBP areas for 720p DisplayPBP1 PBP2Operation Figure 4-14.PIP Split-ScreenModeFigure 4-15. LS-7 Control Menu ControlTrigger 2 operates identically to Trigger Operation LanguageFigure 4-16. LS-7 Service Menu Lamp Hours User Memory 1 / User Memory ISF Day ENTEROperation 5.1 Lamp Replacement 5. Maintenance and TroubleshootingTable 5-1.Troubleshooting Chart 5.2 Troubleshooting TipsMaintenance and Troubleshooting Maintenance and Troubleshooting Table 5-1.Troubleshooting Chart continuedMaintenance and Troubleshooting 6. Serial Communications 6.1 RS-232Connection and Port ConfigurationSerial Command Syntax Key CommandsTable 6-1.Serial Command Key Names and IR Codes gam.crt Precede operation and command with a space op operation command CRThe command type can be one of 5 functions Table 6-2.Serial Commands Table 6-2.Serial Commands continued source.sel Table 6-2.Serial Commands continuedccont Table 6-2.Serial Commands continuedblank.screen Table 6-2.Serial Commands continuedact.source Table 6-2.Serial Commands continuedstatus Table 6-2.Serial Commands continuedDescription Table 6-3. RS-232Error CodesError Code LED IndicationSpecifications 7. SpecificationsLS-7Specifications Table 7-1. LS-7SpecificationsSpecifications Table 7-1. LS-7Specifications continuedSpecifications Table 7-1. LS-7Specifications continuedGeneral 100 7.2 LS-7DimensionsFigure 7-1. LS-7Dimensions Specifications7.3 Supported Timings Table 7-2.Supported Signal Timings by InputSpecifications PAL-60 SpecificationsPAL-B/G PAL-MPage 020-1038-00Rev. A December