Quick Setup
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
Auto Tuner Setup
| Tuner Mode |
|
| Cable |
|
|
|
|
|
|
|
|
|
|
|
| Scan Mode |
|
| Auto |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Start |
|
|
|
|
|
|
|
|
|
|
|
|
| OK | BACK | MENU | |||
| Select | Operate | Back |
| Exit | ||
| |||||||
|
| ||||||
è To choose "Cable or "Air" (or "Skip" when you skip "Auto Tuner Setup")
π† To Scan Mode
è To choose Auto, STD, HRC or IRC
†To "Start"
Press the OK button
Now Programming...
8
When the setup is finished, "Thank you ! Setup is now complete." is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience.
Notes:
•You can choose Scan Mode only when Tuner Mode is Cable.
•If you want to cancel the Auto Tuner Setup, press the MENU button.
•Noise muting will not work during Auto Tuner Setup.
•If you choose "Skip", it finished without doing the Auto Tuner Setup.
Cable Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.
23