Quick Setup
Connecting to a Digital TV Receiver
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in their digital form.
| INPUT 3 |
| |
|
| ||
Y | COMPONENT | VIDEO | AUDIO |
PB | L | ||
PR |
| R |
|
INPUT 4
Y | COMPONENT | VIDEO | AUDIO |
PB | L | ||
PR |
| R |
|
INPUT 5
/INPUT 1 AUDIO
VIDEO
L
R | AUDIO |
AUDIO
OUT
L
R | AUDIO |
TV Rear Panel
After the connections have been made, tighten the screw to secure the cables.
HDMI to DVI Cable
L | R |
|
AUDIO OUT | DIGITAL OUT | |
DTV Decoder
|
|
| SERVICE |
75 Ω | PHOTO | INPUT 1 | INPUT 2 DIGITAL AUDIO |
(VHF/UHF) | VIEWER |
| OPTICAL OUT |
TV Rear Panel
1)Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder to the HDMI
2)Connect a red cable from the DTV decoder RIGHT AUDIO OUT to the RIGHT AUDIO INPUT HDMI AUDIO IN "R" on the back of your television.
3)Connect a white cable from the DTV decoder LEFT AUDIO OUT to the LEFT AUDIO INPUT HDMI AUDIO IN "L" on the back of your television.
•Personal computer compatibility cannot be guaranteed.
•Use an HDMI to DVI cable (commercially available) in order to digitally connect the television with a DTV decoder.
Notes:
•If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. Access the “HDMI Size” in the External Input menu to adjust it. (Refer to page 44.)
•When you do the above connection, set
•The Analog Audio input can only be used with the HDMI
•When setting the
18