JVC LT-20E50SJ manual Feature Menu, Install Menu

• Press “ “ or “ ” button to change Sound			The Child Lock feature can be set On or Off by
Mode.			“	“ /	“ ” button. When Off is selected, there
You can choose Mono, Stereo or Dual			will be no difference in the operation of your
			TV. When On is selected, the TV can only be
(I-II) mode, only if the selected channel sup-
			controlled by the remote control handset. In
ports that Sound Mode.
			this case the control panel buttons except
You can also change sound mode directly
			“ / I” button on the right side of the TV will not
pressing “I-II” button on your remote control.
In case of bilingual broadcast (Dual Sound),			work.
			Selecting Menu Language
you can select original or dubbed language
using mode option. So when somebody lis-			• Using “			“ or “		” button select Language.
tens to the original language from the loud-
speakers, somebody else can listen to the			• Press “ “ or “					” button to select menu lan-
dubbed language from headphone.				guage.
To Store The Settings			EXT-2 Output
In the Sound Menu, all settings are stored			From EXT-2 Output; TV, EXT-1 or EXT-4 can be
automatically.			given. These modes can be chosen by press-
Feature Menu			ing “		“ or “		” button on “EXT-2 Output”.
Press “MENU” button, now you are in
mainmenu. In the main menu, select Feature
using “	“ or “	” button. Then enter the Fea-
ture menu pressing “ “ / “ ” or “OK” button.
			Blue Back (During No Signal)
			The Blue Back Feature can be set by “ “ or
			“	” button to either On or Off.
			To Store Settings
Sleep Timer			In Feature menu all settings are stored auto-
The Sleep Timer is used to turn the TV off after			matically.
			Install Menu
a defined period of time after selecting this
item. The timer can be programmed between			Press “MENU” button, now you are in main
Off and 120 minutes in steps of 10 minutes.
			menu. In the main menu, select “Install” us-
(Off, 010, 020, 030, 040, ... , 120)
			ing		“ or “		” button. Then enter the Install
If sleep timer is activated, at the end of the
			menu pressing“					“ / “ ” or “OK” button.
selected the time, the TV goes automatically
to stand-by mode.
Child Lock
You can use this feature to prevent children
turning on/off TV or changing programmes or
adjustments etc. without remote control.
• Using “	“ or “	” button select Child Lock.
• Press “	“ / “	” button to select Child Lock
On or Off .

ENGLISH - 17 -