JVC LT-20E50SJ manual Via the ANT aerial socket, Decoder, TV and Video Recoder VCR, Ntsc Playback

Page 27

If you have a device which outputs component signal, connect it to the EXT-3 terminal with a component video cable.

Via the ANT (aerial) socket

If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.

To store the test signal that comes from the equipment, see “Install Menu” on page 17 and store it to the program number 0. You can watch images from that equipment to select the program number which you stored the test signal.

Decoder

Cable TV offers you a wide choice of programmes. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broad- casting organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled.

For further information ask your dealer. See also the booklet supplied with your decoder.

Connect a decoder with an aerial socket to the TV

• Connect the aerial cable.

Connect a decoder without an aerial socket to the TV

Connect the decoder to your TV with a eurocable (RCA Jack Cable) to EXTERNAL (RCA Jack). When your decoder has a Euroconnector / RCA Jack you can obtain better picture quality if you connect a eurocable (RCA Jack Cable) to EXTERNAL (RCA Jack).

TV and Video Recoder (VCR)

Connect the Video Recorder to the ANT (an- tenna input) socket of the TV with the aerial cable.

Connect the Video Recorder to the EXT-1 or EXT-2 terminal with the SCART cable, or con- nect it to the EXT-4 terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press “AV“ button to select the corre- sponding AV mode.

INTSC 3.58/4.43 system is detected automati- cally in AV mode.

Camera and Camcorder

To connect to the EXT-4 terminal

Connect your camera or camcorder at the back side of your TV.

Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You should connect the jacks to the input in the same colour.

Connect the decoder to the video recorder

Some video recorders have a special euro- connector for decoder.

Connect a eurocable to the euroconnector of your decoder and to the special eurocon- nector of your video recorder. See also the handbook of your video recorder.

To connect your video recorder to the TV, see TV and Video Recorder section.

If you want to connect more equipment to your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket on the right side of your TV, to connect headphones.

Connecting the PC

Connect PC monitor with 15-pin PC cable to the 15-pin connector on the rear of the com- puter. For detail installation procedure see In- stallation in PC mode.

To connect to S-Video input

Connect your camera or camcorder at the back side of your TV.

Connect your equipment to the TV via S-Video input at the back side by using S-Video cables.

ENGLISH - 26 -

Image 27
Contents LT-20E50SJ Important Instruction ContentsSome DOs and DON’Ts for you For your safetyEnglish English Care and disposal Important Information Please take noteYellow Remote Control ButtonsControl Panel Buttons How to remove the stand Using the standInstalling TV on the wall Preparation Before Switching on your TVTo switch the TV on Switching the TV ON/OFFHow to connect other devices Inserting batteries in the remote control handsetInitialSettings First A.P.S. Automatic Programming SystemLink Operating the TV Operating with Remote ControlPicture Menu MenuSystemEnglish Tive at once Sound MenuInstall Menu Feature MenuVCR Program MenuBers of some of channels will change Other Features Volume Bar Mute IndicatorNo-Signal Detection TV mode No-Signal and Out Of Range Detection PC modePC Picture Position Menu InstallationMain Menu in PC mode PCModeSound in PC mode PC Picture MenuPIP Picture Teletext PeripheralEquipment Connections Decoder Connecting HeadphonesConnecting the PC Via the ANT aerial socketRPSRQHQW$XGLR,Q5 PeripheralEquipmentConnections AntennaConnectionsRGH 5HVROXWLRQ UHTXHQF\ PC Input Typical Display ModesTips Model LT-20E50SJ SpecificationsLT-20E50SU Contents If in Doubt Please Consult a COMPE- Tent Electrician DO… English Important Information Please take note 018 Control Panel Buttons Using the stand Installing TV on the wall Preparation 795 $53$ 1/ &$%/79 InitialSettings Operating the TV MenuSystem English Sound Menu Child Lock feature can be set On or Off by Program Menu English Other Features No input signal detected PCMode PC Picture Menu Teletext PeripheralEquipment Connections Via the ANT aerial socket RPSRQHQW$XGLR,Q5 $17,1VIDEO Audio /$ 8, 2 ,1 59,2,1 ,1287 ,1 9HU+ Tips Model LT-20E50SU