JVC LT-20E50SJ manual Program Menu

In EXT mode, Install menu appears like this:				Decoder(EXT-2)
				You can use this mode to connect any de-
				coder to your TV.
				• Press the“	“ or “ ” buttons to set it “On” or
You can change only Colour system and				“Off”.
VCR.				When you select Decoder(EXT-2) “On”,
Selecting Programme				EXT-2 output will be chosen as TV mode only
• Using “ “ or “			” button select Programme.	and any scrambled channels will be un-
				scrambled through decoder connected your
•To select programme number, you can use
				TV via EXT-2 output.
“ ” / “	” button or Digit Buttons			Setting VCR (Video Cassette Recorder )
Selecting Band				Mode
Band, can be chosen either,				• This item can be seen in TV, EXT-1, EXT-2,
• “C” or “S” by “			” or “ ” button.	EXT-3 and EXT-4 modes.
				• If you want to watch a VCR source from one of
Selecting Channel
				these modes, then it will be better to set
Channel can be changed by “ ” or “ ” but-				VCR mode “on”. For this, while the cursor is
				on this item press the“ “ or “		” buttons to
ton or by Digit Buttons.
Selecting Colour System				set it “On”.
				• If you want to watch a DVD , then you must set
Using “		” or “	” button on Colour System,	this item “off”; because DVD is not a source
you can change the colour system to PAL,				like a VCR and to see the picture better, you
SECAM or Auto.				must set the VCR mode “Off”.
Note: In EXT mode, you can choose NTSC				To Store Settings
3.58 and NTSC 4.43 as well)				• Press “ “ /	“ ” or “OK” button on Store
Selecting Sound System
				option to store Install menu settings.
Using “		“ or “	” button on Sound System,	• After stored, T-V Link menu will appear. If you
you can change the standard to BG, DK, I, L,				do not need to do T-V Link, press BLUE but-
Lp.				ton to exit the menu.
Selecting Fine Tuning				Program Menu
You can use the Fine Tuning process for fine				Press "MENU" button, now you are in main
adjustment (after coarse adjustment), if you				menu. In the main menu, select “Program”
are not happy about the image on the screen.				using “ “ or “ ” button. Then enter the
Use “	“ or “ ”		button on Fine Tuning item,	Programme menu, press “ “ /		“ ” or “OK”
until getting the best image on the screen.				button.
Selecting Search				Note: There is no Program menu in any EXT
To start the search process, press “ ” button				modes.

for forward search or ““ button for backward search. If a signal is found or reaches to end

of the band after searching, press ““ or “” buttons to continue search process. To stop the search process when you want, press

““ or “” buttons at any time.

ENGLISH - 17 -