Feature Menu

Use this settings to adjust volume for audio out terminal which is located at the right side of the TV.

•Using “ “ or “” button select Audio Out.

•Press ““ or “” button or directly press “OK” button on Audio Out, to enter the Audio Out menu.

Audio Out Volume

•As you enter the Audio Out sound menu, Vol- ume will be the only option.

•Press “” button to increase volume.

•Press ““ button to decrease volume. Selecting Sound Mode

•Using “ “ or “” button select Mode.

•Press ““ or “” button to change Mode.

You can choose Mono, Stereo or Dual (I-II) mode, only if the selected channel sup- ports that mode.

You can also change sound mode directly pressing “I-II” button on your remote control.

To Store The Settings

In the Sound Menu, all settings are stored automatically.

Press "MENU" button, now you are in mainmenu. In the main menu, select Feature

using “ “ or “ ” button. Then enter the Fea- ture menu pressing ““ / “” or “OK” button.

Sleep Timer

The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item. The timer can be programmed between

Off and 120 minutes in steps of 10 minutes. (Off, 010, 020, 030, 040, ... , 120)

If sleep timer is activated, at the end of the selected the time, the TV goes automatically to stand-by mode.

Child Lock

You can use this feature to prevent children turning on/off TV or changing programmes or adjustments etc. without remote control.

•Using ““ or “” button select Child Lock.

•Press ““ / “” button to select Child Lock On or Off.

The Child Lock feature can be set On or Off by

““ / “” button. When Off is selected, there will be no difference in the operation of your TV. When On is selected, the TV can only be controlled by the remote control handset. In

this case the control panel buttons except "" button on the right side of the TV will not work.

Selecting Menu Language

•Using ““ or “ ” button select Language.

•Press ““ or “” button to select menu lan- guage.

EXT-2 Output

From EXT-2 Output; TV, EXT-1 or EXT-4 can be given. These modes can be chosen by press-

ing ““ or “” button on "EXT-2 OUTPUT".

Blue Back (During No Signal)

The Blue Back Feature can be set by ““ or “” button to either On or Off.

To Store Settings

In Feature menu all settings are stored auto- matically.

ENGLISH - 17 -