PC Mode
Installation
•Power off both Computer and Display before making any connections.
•Set your PC’s resolution correctly before con- necting to the TV. See the table in page 30 for supported modes.
•Use a
put terminal.
•Tighten the screws of the Display cable until the connectors are fastened securely (fin-
Main Menu in PC mode:
Enter the main menu by pressing the “MENU” button on the remote control.
PC Picture Position Menu:
In the Main menu, select “PC Picture Posi- tion” using “
“ or “ 
” button, then enter the
menu pressing “
“ / “
” or “OK” buttons..
Auto Position
If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.
•Select Auto position item by using “
“ or “
” buttons.
•Press “OK” button.
•Press “MENU” button or “BACK” button to store the value.
Warning: Auto position adjustment recom- mended to be done with the full screen image for the proper adjustment.
Horizontal Position
This item shifts the image horizontally to right hand side or left hand side of the screen.
•Select Hor. Position item by using “ 
“ or “
” button.
•Use “
“ or “
” button to adjust the value.
•Press “MENU” button or “BACK” button to store the value.
Vertical Position
This item shifts the image vertically towards the top or bottom of the screen.
•Select Ver. Position item by using “ 
“ or “
” button.
•Use “
“ or “
” button to adjust the value.
•Press “MENU” button or “BACK” button to store the value.
Dot Clock
Dot Clock adjustments correct interference that appear as vertical banding in dot inten- sive presentations like spreadsheets or para- graphs or text in smaller fonts.
•Use “
“ or “
” button to adjust the value. Clock Phase
Depending on the resolution and scan fre- quency that you input to the TV Set, you may see a muddy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
• Use “
“ or “
” button to adjust the value.
ENGLISH - 23 -