Using the TV's menu
MID: | PICTURE FEATURES menu |
The normal white colour. | PICTURE FEATURES |
|
WARM:
A radish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films.
•You cannot select the WHITE BALANCE function in the 16:9 mode of the ZOOM function.
AI ECO SENSOR
When you set the AI ECO SENSOR function to mode 1 or mode 2: the screen contrast is automatically adjusted to a setting suitable for the brightness of your room. This reduces eye strain for you and the power consumption of the TV.
AI ECO SENSOR 1, 2:
This function is turned on.
OFF:
This function is turned off.
DIGITAL VNR |
| AUTO |
DigiPure | AUTO | |
PULL DOWN | AUTO | |
COLOUR SYSTEM |
| |
ZOOM |
| |
PICTIRE TILT |
| |
OK :OK
TV :EXIT
DISP :BACK
DIGITAL VNR
The DIGITAL VNR function cuts down the amount of noise in the original picture.
AUTO:
The TV will be automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture.
•If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can.
MAX:
AI ECO DISPLAY
With AI ECO SENSOR being set to 1 or 2 and AI ECO DISPLAY on, it displays the luminosity of the room using the clover marks on the screen for several seconds, when the luminosity changes. The lower luminosity is indicated by more clover marks.
The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX.
•The MAX setting is not suitable for high- quality pictures which contain a lot of noise.
MIN:
The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN.
•The MIN setting is not suitable for low- quality pictures which contain a lot of noise.
18