JVC HV-29WZ, HV-34LZ manual Poor sound, Operation disabled, Other concerns, Troubleshooting

Page 36

Troubleshooting

When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.

It is a phenomenon unavoidable due to the nature of the picture tube itself, and not due to a TV failure.

When the picture disappears from the screen, the unnatural colours will also disappear.

When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted.

This is due to the condition of the video signal, and not because of malfunction.

Poor sound

Have you adjusted BASS or TREBLE properly? If not, follow the description "Adjusting the Sound" on page 21 to try to adjust them properly.

When the TV channel reception is poor, it can be hard to hear the stereo or bilingual sound. In this case, follow the description "STEREO / I II" on page 21 to hear the sound more easily by changing it to a mono sound.

Operation disabled

Have the batteries of the remote control become exhausted?

Follow the description "Putting the batteries into the remote control" on page 4 and replace them with new batteries to try solve the problem.

Have you attempted to use the remote control at the sides or rear of the TV or at a location more than seven meters apart from the TV location? Operate the remote control in the front of your TV or a location less than seven meters from your TV to try to solve the problem.

When you are viewing a teletext programme, you cannot operate the menus.

Press the TV/VIDEO button to return the teletext programme to the ordinary TV programme to try operating the menus.

Is the CHILD LOCK function set to ON? If the CHILD LOCK function is set to ON, you cannot operate the TV with the front control buttons of the TV. Follow the description "CHILD LOCK" on page 22 to try to set the CHILD LOCK function to OFF.

If the TV operation becomes disabled suddenly, press the Main power button on the TV and turn off the main power. Try to press the Main power button again to turn on the main power. If the TV returns to a normal state, it is not a failure.

Other concerns

When the SLEEP TIMER function or AUTO SHUTOFF function operates, the TV is automatically turned off.

If the TV is turned off suddenly, try to press the POWER button to turn on the TV once again. At this time, if the TV resumes a normal state, there in no problem.

If you bring a magnetized device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen.

In this case, keep the device apart from your TV. If the speaker causes such phenomena, use the magnetic-shielded speaker instead.

A picture may be tilted due to the influence of the earth's magnetism. In this case, use the "PICTURE TILT" on page 20 to complete the tilt.

36

Image 36
Contents HV-34LZ HV-29WZ Do not allow objects or liquid into the cabinet openings Setting up your TV Connecting the aerial and VCRIf not connecting a VCR see fig.A If connecting a VCR see fig.BConnecting the power cord Putting the batteries into the Remote controlMaking the initial settings Now, setting up is complete Please enjoy your new JVC TV TV buttons and functions Headphone jack VIDEO-1 terminal =VIDEO-2 terminal ~ TerminalRemote control buttons and functions Press the Power buttonWatch images from external devices Press the TV/VIDEO buttonMuting button Zoom buttonCinema Surround button Picture Mode button RETURN+ buttonBright StandardButton Display buttonChoose a TV channel or a Video terminal Colour System buttonSound System button Broadcasting SystemsViewing a teletext programme Using the List mode Subpage buttonUsing the TVs menu Basic operationPress the / buttons to choose a function Press the MENU/OK button to complete the setting Operation with the buttons on the TVPicture Setting menu Picture ModeAdjusting the picture White BalanceAI ECO Sensor Digital VNRAI ECO Display DigiPure Pull DownDigipure function Picture motion compensation functionColour System ZoomPicture Tilt Choose ZOOM, then press the MENU/OK buttonSound Setting menu Adjusting the soundAI Volume StereoFeatures menu Sleep TimerChild Lock Channel GuardUsing the TVs menu Set the ID number you want To view a locked TV channelPress the / buttons to choose a TV channel Press the number buttons to enter the ID numberVIDEO-3 Setting Auto ShutoffVideo ComponentInstall menu LanguageAuto Program Choose LANGUAGE, then press the MENU/OK buttonEDIT/MANUAL Insert DeleteMove ManualPress the / buttons to Choose a TV channelID function Enter a channel name IDInsert PreparationPress the green button to start Insert function CH/CC number Ccir Oirt AustraliaTeletext Language Connecting the external devices Before connecting anythingAdditional preparation Connecting methods Connecting devices toConnecting Headphones Output terminalConditions to use the AV Compu Link remote control system Setting up the AV Compu Link remote control systemIf a DVD player is connected to the VIDEO-1 terminal If a VCR is connected to the VIDEO-2 terminalIf a DVD player is connected to the VIDEO-2 terminal Troubleshooting If you cannot turn on the TVNo picture/No sound Poor pictureOperation disabled TroubleshootingPoor sound Other concernsTroubleshooting Specifications Design and specifications subject to change without noticePage HV-34LZ / HV-29WZ