JVC HV-34LZ, HV-29WZ manual Conditions to use the AV Compu Link remote control system

Page 33

Additional preparation

Connecting AV COMPU LINK Supported Devices

AV COMPU LINK remote control system is a system in which related devices are automatically controlled when you operate one device.

If you apply this system to the TV, you can have the TV automatically perform the required operations by operating one external device. You don't have to use the TV's remote control to turn on the TV or change the VIDEO modes.

Examples of the AV COMPU LINK remote control system operations

Simply by pressing the PLAY button on a VCR or a DVD player, you can view images from the device.

Simply by inserting a prerecorded tape (a tape with the record safety tab removed) to a VCR, you can view the tape.

Simply by operating the AV Control Receiver, you can have the TV turned on/off (in standby mode) or the VIDEO mode changed correctly.

•The performance of the AV COMPU LINK remote control system varies depending on the connected device. See the device's instruction manual.

•When you select "TV SOUND" as the input source with the AV Control Receiver, there are cases where the TV's MUTING function automatically operates and the sound from the TV's speakers is muted.

In such cases, press the VOLUME-/+ buttons or the MUTING button on the TV's remote control to cancel the MUTING function. You can regain the sound from the TV's speakers.

Conditions to use the AV COMPU LINK remote control system

•A device equipped with an AV COMPU LINK terminal is required.

•You must connect the TV and the device with an AV COMPU LINK cable.

AV COMPU LINK cable is not supplied with this TV. If an AV COMPU LINK cable is unavailable, connect them with a cable with dia. 3.5 mm (mono) male plugs at both ends.

•You must connect the device to an appropriate VIDEO terminal and set it up correctly. Otherwise the AV COMPU LINK remote control system will not function correctly. For details, see "Setting up the AV COMPU LINK remote control system".

•The TV must be in standby mode (the POWER lamp lighting red). If the TV's Main power is off (the POWER lamp off), the AV COMPU LINK remote control system does not function.

Setting up the AV COMPU LINK remote control system

CAUTION:

•With some devices, the setup method differs from the ones explained here. Be sure to read the device's instruction manual thoroughly before setting it up.

1Connect the device to the TV's VIDEO-1 or VIDEO-2 terminal.

If you want to connect a DVD player to the TV with a component video cable:

Connect the DVD player to the TV's VIDEO-3 terminal.

•For detailed connecting instructions, see "Connecting the exterminal devices" on page 31.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents HV-34LZ HV-29WZ Do not allow objects or liquid into the cabinet openings Connecting the aerial and VCR Setting up your TVIf not connecting a VCR see fig.A If connecting a VCR see fig.BConnecting the power cord Putting the batteries into the Remote controlMaking the initial settings Now, setting up is complete Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal = Headphone jackVIDEO-2 terminal ~ TerminalPress the Power button Remote control buttons and functionsWatch images from external devices Press the TV/VIDEO buttonMuting button Zoom buttonCinema Surround button RETURN+ button Picture Mode buttonBright StandardDisplay button ButtonChoose a TV channel or a Video terminal Colour System buttonBroadcasting Systems Sound System buttonViewing a teletext programme Subpage button Using the List modeUsing the TVs menu Basic operationPress the / buttons to choose a function Operation with the buttons on the TV Press the MENU/OK button to complete the settingPicture Mode Picture Setting menuAdjusting the picture White BalanceAI ECO Sensor Digital VNRAI ECO Display Pull Down DigiPureDigipure function Picture motion compensation functionZoom Colour SystemPicture Tilt Choose ZOOM, then press the MENU/OK buttonAdjusting the sound Sound Setting menuAI Volume StereoSleep Timer Features menuChild Lock Channel GuardTo view a locked TV channel Using the TVs menu Set the ID number you wantPress the / buttons to choose a TV channel Press the number buttons to enter the ID numberAuto Shutoff VIDEO-3 SettingVideo ComponentLanguage Install menuAuto Program Choose LANGUAGE, then press the MENU/OK buttonDelete EDIT/MANUAL InsertMove ManualChoose a TV channel Press the / buttons toID function Enter a channel name IDInsert PreparationPress the green button to start Insert function Ccir Oirt Australia CH/CC numberTeletext Language Connecting the external devices Before connecting anythingAdditional preparation Connecting devices to Connecting methodsConnecting Headphones Output terminalSetting up the AV Compu Link remote control system Conditions to use the AV Compu Link remote control systemIf a DVD player is connected to the VIDEO-1 terminal If a VCR is connected to the VIDEO-2 terminalIf a DVD player is connected to the VIDEO-2 terminal If you cannot turn on the TV TroubleshootingNo picture/No sound Poor pictureTroubleshooting Operation disabledPoor sound Other concernsTroubleshooting Design and specifications subject to change without notice SpecificationsPage HV-34LZ / HV-29WZ
Top Page Image Contents