JVC HV-34LZ Troubleshooting, If you cannot turn on the TV, No picture/No sound, Poor picture

Page 35

Troubleshooting

If a problem arises while you are using the TV, please read this "Troubleshooting" well before you request having the TV repaired. You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has problems, you may think there is a problem with the TV itself.

Important:

This Troubleshooting guide only covers problems whose cause are not easy to determine. If a question arise when you are operating a function, read the page(s) corresponding to the operation of the function well, not this Troubleshooting guide.

After you have followed the Troubleshooting description or the operating description of the functions concerned without any success, remove the AC plug from the AC outlet and re - quest a repair of your TV. Do not attempt to repair the TV by yourself or remove the rearcover of the TV.

If you cannot turn on the TV

Is the AC plug connected to the AC outlet?

Is the POWER lamp lit? If not, press the Main power button.

No picture/No sound

Have you chosen a TV channel whose reception is extremely bad? In this case, the BLUE BACK function will be activated, the entire screen becomes blue, and the sound is muted. In spite of this, if you want to view the TV channel, follow the description "BLUE BACK" on page 22 to try to change the BLUE BACK function setting to OFF.

Are your SOUND SYSTEM settings for the TV channels correct?

Follow the description "SOUND SYSTEM Button" on page 12 to try to solve the trouble.

Poor picture

If noise totally obscures the picture (snow), the aerial or aerial cable may have trouble. Check the following to try to solve the trouble:

Has the TV and aerial been connected properly?

Has the aerial cable been damaged? Is the aerial pointed to the right direction?

Is the aerial itself faulty?

If the TV or aerial receives interference from the other devices, stripes or noise may appear in the picture. Move such device as an amplifier, personal computer, or a hair drier that can cause inter- ference away from your TV, or try chan- ging its location. If the aerial suffers int- erference from a radio tower or high- voltage wire, please contact your local dealer.

If the TV receives interferences from signal reflecting from mountains or building, double-pictures(ghosting) will occur.

Try to change the aerial's direction or replace the antenna with the one with better directionality.

Are you COLOUR SYSTEM settings for the TV channels correct? Follow the description "COLOUR SYSTEM button" on page 11 to try to solve the trouble.

Has COLOUR or BRIGHT been controlled properly? Follow the description "Adjusting the picture" on page 17 to try to adjust them properly.

Videotaping teletext is not recommended because it may not record correctly.

35

Image 35
Contents HV-34LZ HV-29WZ Do not allow objects or liquid into the cabinet openings If connecting a VCR see fig.B Setting up your TVConnecting the aerial and VCR If not connecting a VCR see fig.AMaking the initial settings Connecting the power cordPutting the batteries into the Remote control Now, setting up is complete Please enjoy your new JVC TV TV buttons and functions Terminal Headphone jackVIDEO-1 terminal = VIDEO-2 terminal ~Press the TV/VIDEO button Remote control buttons and functionsPress the Power button Watch images from external devicesCinema Surround button Muting buttonZoom button Standard Picture Mode buttonRETURN+ button BrightColour System button ButtonDisplay button Choose a TV channel or a Video terminalBroadcasting Systems Sound System buttonViewing a teletext programme Subpage button Using the List modePress the / buttons to choose a function Using the TVs menuBasic operation Operation with the buttons on the TV Press the MENU/OK button to complete the settingWhite Balance Picture Setting menuPicture Mode Adjusting the pictureAI ECO Display AI ECO SensorDigital VNR Picture motion compensation function DigiPurePull Down Digipure functionChoose ZOOM, then press the MENU/OK button Colour SystemZoom Picture TiltStereo Sound Setting menuAdjusting the sound AI VolumeChannel Guard Features menuSleep Timer Child LockPress the number buttons to enter the ID number Using the TVs menu Set the ID number you wantTo view a locked TV channel Press the / buttons to choose a TV channelComponent VIDEO-3 SettingAuto Shutoff VideoChoose LANGUAGE, then press the MENU/OK button Install menuLanguage Auto ProgramManual EDIT/MANUAL InsertDelete MoveEnter a channel name ID Press the / buttons toChoose a TV channel ID functionPress the green button to start Insert function InsertPreparation Ccir Oirt Australia CH/CC numberTeletext Language Additional preparation Connecting the external devicesBefore connecting anything Output terminal Connecting methodsConnecting devices to Connecting HeadphonesSetting up the AV Compu Link remote control system Conditions to use the AV Compu Link remote control systemIf a DVD player is connected to the VIDEO-2 terminal If a DVD player is connected to the VIDEO-1 terminalIf a VCR is connected to the VIDEO-2 terminal Poor picture TroubleshootingIf you cannot turn on the TV No picture/No soundOther concerns Operation disabledTroubleshooting Poor soundTroubleshooting Design and specifications subject to change without notice SpecificationsPage HV-34LZ / HV-29WZ