JVC LT-32JM30 manual Control with Hdmi, System Info, Auto Demo

Page 42

Customizing your TV

Control with HDMI

If you use a HDMI CEC compatible device, set this setting to “On”.

HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional protocol used in HDMI.

HDMI CEC on this TV is compliant with “High-Definition Multimedia Interface Specification”.

The TV does not support HDMI CEC functions that are not listed below.

The TV does not guarantee to support use of all HDMI CEC enabled devices.

Devices that are not enabled to HDMI CEC cannot be controlled with this TV.

Control the TV using the HDMI CEC enabled device –

Turn the TV on and switch to the video source of the operating device.

Switch to the video source of the operating device.

Turn the TV off with the HDMI CEC enabled device you are viewing.

For operating instructions of the device, refer to the device’s manual.

Control the HDMI CEC enabled device using the TV –

Turn off the operating device by turning off the TV.

Some device may not support this function. For more details refer to the device’s manual.

Send status of the TV to the HDMI CEC enabled device –

When switching the TV’s external input or channel.

When switching the TV’s menu language.

Information regarding behavior of the device when status is received, refer to the external device’s manual.

If HDMI CEC does not work correctly:

When HDMI CEC enabled device is connected to INPUT 1, INPUT 2 or INPUT 3 with an HDMI cable, you may not be able to control TV’s external input. To solve the problem set this setting to “Off”.

System Info

You can confirm the TV’s software version.

Auto Demo

Auto Demo explains this TV’s features to you.

Notes:

The Auto Demo mode will start automatically when you set Retail in Initial Setup.

If you press any button on the television or remote, with the exception of

POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds have passed with no operation, the Auto Demo mode will start again.

If you want to turn off the Auto Demo, press the MENU button.

42

Image 42
Contents Important Note Serial Number Model NumberDo not attempt to service the product yourself Risk of Electric Shock Do not OpenImportant Safety Instructions Important Safety Instructions FCC NoticeTable of Contents Key Features Full or Widescreen ModeLogos & Licenses Package Contents Caring for the frame and stand Caring for the ScreenPackage Contents Install your TV Tidying the cablesConnect the stand Disconnecting the stand Front Panel Photo Viewer ConnectorTV Basic Controls Side PanelTV Basic Controls Rear PanelHdmi Video AudioCompatible Signal Remote Control On Timer / Input / Sleep TimerFull / Regular / Slim / Panorama / Cinema / Full Native Basics Standard / Dynamic / Theater / Game Speech / Jazz / Classic / Rock / UserFAVORITE. Move Turn on the TV Set the language Initial SetupSet the mode Set time attributeThank you! Setup is now complete Set TV attributeUsing the menus Customizing Your TVDisplay the menu bar Display the desired menu Change or adjust the setting Close the menuVideo Status Color Management Video ResetColor Temp Dynamic GammaThumbnail View Video Input LabelPhoto Viewer Slide ShowInterval Aspect Setting Closed CaptionType Tuner Mode AutoscanAdd Channel When entering the password Edit ChannelChip Set a new password When you lock or unlock channelsPassword Confirm and setGeneral Audience Sexual Content Strong LanguageNR Not Rated PG Parental Guidance SuggestedCan. Eng Can. FreGuide Reset Auto AdjustmentPhase Adjustment PC H-PositionSurround Audio ResetDigital Audio ML Sound StatusPower Power IndicatorLanguage Plug In MenuTime Zone Noise MuteControl with Hdmi System InfoAuto Demo Optical Out Connect an Antenna or Basic Cable Connect a Cable BoxConnect a VCR / DVD Player using Component Video Connect a VCR / DVD Player using Composite VideoConnect an Amplifier using the Digital Audio Optical OUT Connect an Amplifier or Home Theater SystemConnect a Digital Source Device Connect a CamcorderConnect a Blu-ray or Hdmi Device Connect a Computer Troubleshooting Picture is snowy image noise Picture is slightly cut off when you use 1080p format onlyNo signal or signal can not be displayed Screen is 80% blackSpecifications subject to change without notice SpecificationsPage Page Page Canada Digital Television Transition Notice