Kramer Electronics TP-141 user manual Getting Started, Achieving the Best Performance

Page 5

2 Getting Started

We recommend that you:

∙Unpack the equipment carefully and save the original box and packaging materials for possible future shipment

∙Review the contents of this user manual

iGo to http://www.kramerelectronics.com/support/product_downloads.asp to check for up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate).

2.1Achieving the Best Performance

To achieve the best performance:

∙Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)

∙Do not secure the cables in tight bundles or roll the slack into tight coils

∙Avoid interference from neighboring electrical appliances that may adversely influence signal quality

∙

!

Position your Kramer products away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.

2

TP-141, TP-142 - Getting Started

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents TP-141 Page Figures Introduction Achieving the Best Performance Getting StartedRecycling Kramer Products Safety InstructionsOverview About the Power Connect FeatureShielded Twisted Pair STP/Unshielded Twisted Pair UTP Defining the TP-141 XGA/Audio Line Transmitter Feature FunctionTP-142 XGA/Audio Line Receiver Defining the TP-142 XGA/Audio Line ReceiverLink LED Power and then switch on the power to each device Connecting the TP-141, TP-142Connecting the TP-141, TP-142 PIN Wiring the TP Line in / Line OUT RJ-45 ConnectorsTP-141 TP-142 Technical SpecificationsPage Safety Warning
Top Page Image Contents