Kramer Electronics user manual Defining the TP-141 XGA/Audio Line Transmitter, Feature Function

Page 9

3.3Defining the TP-141 XGA/Audio Line Transmitter

The TP-141is an XGA/stereo audio line transmitter that receives an XGA signal and an unbalanced stereo analog audio signal, codes them, and transmits them over CAT 5 cable to a TP-142receiver. Figure 1 defines the TP-141.

Figure 1: TP-141 XGA/Audio Line Transmitter

	#				Feature			Function
1				ON LED			Illuminates when receiving power

2				XGA IN 15-pin HD Connector			Connect to the XGA source

3				LINE OUT RJ-45 Connector			Connects to the LINE IN RJ-45 connector on the TP-142
							XGA/Audio Line Receiver

4				AUDIO IN 3.5mm Mini Jack			Connects to the audio source
5				12V DC			+12V DC connector for powering the unit

6	TP-141, TP-142 - Overview

Image 9

Contents TP-141 Page Figures Introduction Achieving the Best Performance Getting StartedRecycling Kramer Products Safety InstructionsOverview About the Power Connect FeatureShielded Twisted Pair STP/Unshielded Twisted Pair UTP Defining the TP-141 XGA/Audio Line Transmitter Feature FunctionTP-142 XGA/Audio Line Receiver Defining the TP-142 XGA/Audio Line ReceiverLink LED Power and then switch on the power to each device Connecting the TP-141, TP-142Connecting the TP-141, TP-142 PIN Wiring the TP Line in / Line OUT RJ-45 ConnectorsTP-141 TP-142 Technical SpecificationsPage Safety Warning