LG Electronics 26LD345H, 37LD340H, 37LD325H, 37LD345H, 42LD345H, 42LD340H Channel, Run Auto Tuning

Master TV Setup (Cont.)

(Continued from previous page)
3. Run Auto Tuning.
a)	To search for all available analog and digital channels, go to the		CHANNEL	Move	Enter
	Channel Menu, select the Auto Tuning option, and follow the
	on-screen instructions.		Auto Tuning
b)	Use the Channel Edit option in the Channel Menu to edit the		Manual Tuning
			Channel Edit
	channel lineup, as necessary, to include only free to guest
			Channel Label
	(non-encrypted) channels.
	•	Add/delete channels per your system requirements.
	•	Use the Channel Label option in the Channel Menu to select
		the appropriate trademark/icon for each channel’s Channel-Time
		on-screen display. Icons are available for familiar channels,	Use Channel Menu options to
		such as ABC, CBS, NBC, etc. Identifiable labels (icons) should	run Auto Tuning, edit channels,
		enable the end user to readily know what common networks are	and select channel icons.
		available.

Note: If Installer Menu item 103 ATSC TUNE MODE is set for Physical Channel tuning (default and recommended setting), channels with minor channel numbers higher than 255 will not transfer correctly in step 5. If item 103 is set for Virtual Channel tuning and either the major or minor channel numbers are higher than 255, the channel(s) will not transfer correctly in step 4.

Note: You can add the channel icons in this step or as described in step 6. Also in step 6, you can add custom text labels for channels without icons.

4.Transfer the TV setup menu settings to the commercial controller (PTC):

2-5-5 + MENU Mode

Important: This step is essential for successful cloning. Without this step, the PTC will not contain any of the TV setup menu settings.

a)After the TV channel lineup has been edited and channel label icons added, tune to the channel (source) for which you wish to transfer TV setup menu settings.

Note: If you intend to use a clone programmer for cloning purposes, this must be either an analog channel or Aux input.

b)Enter the Installer Menu, and press 2-5-5+ MENU on the Installer Remote to initiate the transfer of the Master TV Setup to the PTC. The TV exits the Installer Menu and then tunes through the channels in the channel lineup during the transfer. When the transfer is complete, the TV tunes back to the channel that was tuned before the transfer began.

Note: The maximum number of channels that can be transferred is 141. An attempt to transfer more than 141 channels will result in erratic TV tuning operation.

(Continued on next page)

206-4186 13