LG Electronics 26LD340H Clone Programmer Cloning Procedures, TLL-1100A Cloning Notes, Mpi, Cable

Page 26

Clone Programmer Cloning Procedures (Cont.)

Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer

Caution: Do not connect a clone programmer to a PPV card installed in the Master or Target TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port. Either of these actions will damage the clone programmer and, if applicable, the PPV card.

Cloning is accomplished using the TV/clone programmer MPI ports for communication (see figure).

TLL-1100A Cloning Notes

Read the IMPORTANT CLONING INFORMATION on page 23 before beginning any cloning procedures.

Ensure the TLL-1100A is either fully charged or connected to AC power.

Learning and Teaching is only possible between identical model TVs; however, the TLL-1100A can store up to eight different Master TV Setups.

Learn Setup from Master TV

Antenna

or CATV

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

TLL-1100A Clone

Programmer

TV Link

CHARGE

Loader

 

 

 

TLL1100A

 

Ready

 

MODE

MENU

MPI

 

ENTER

Cable

 

 

 

RECEIVE

SEND

TLL-1100A

1.Ensure the Master TV is set up completely and in Pass-through Mode.

2.Tune/set the TV to an analog channel or Aux input, and then, plug one end of the MPI cable into the TV MPI port.

3.Turn ON the TLL-1100A.

4.Use the MODE button on the TLL-1100A to select Clone Mode.

5.Use the Left/Right arrows on the TLL-1100A to select the Memory CBank (1 to 8) in which to store the Master TV Setup.

6.Plug the other end of the MPI cable into the MPI port on the bottom of the TLL-1100A. The Clone Selection Menu will display on the TV screen.

7.Press 1 on the Installer Remote to select LEARN FROM TV from the Clone Selection Menu. Then, press ENTER to transfer the Master TV Setup into CBankX on the TLL-1100A.

Learning usually takes about 90 seconds. “LEARNING IN PROGRESS” will be displayed on the screen while the TLL-1100A copies the Master Setup. When the Learning process is complete, a “LEARNING COM- PLETE” message will be displayed.

8.When Learning is complete, disconnect the MPI cable from the Master TV.

CLONE SELECTION MENU Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-To change menu items, press channel keys or digits.

-To execute item, press Enter.

26

206-4186

Image 26
Contents 206-4186 Rev B Copyright 2011, LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist External MPI Control FTG ModeRemote Management in FTG Mode CloningProCentric TV Interactive Menu Features ProCentric OperationProCentric Setup Mute Installer Remote Control Typical Key FunctionsVOL MenuBefore You Begin Master TV SetupClonable TV Setup Menu Features Cloning MethodsSet up TV features Master TV Setup ProcedureSet Installer Menu items Run Auto Tuning ChannelVerify the TV setup Lock the channel lineupUsing the Installer Menu Installer MenuAccessing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 073 through CH not AvbleMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence Caption Lock Sleep TimerFeature Level Poll RateChksm Error Checksum Error DIS. CH-TIME Disable Channel-TimeEN. CH-T COL. Enable Channel-Time Custom Color Rear RGB EN. Rear RGB EnableProcentric Atsc Tune ModePower Savings Back LightingChannel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Notes USB Cloning ProcedureLearn Setup from Master TV Teach Master TV Setup to Target TV TLL-1100A Clone Programmer Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerFrom previous FTG Mode via CPU FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via EBLFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU Teaching FMA Configuration to a TV Learning an FMA Configuration File from a TV Learn From TV FMAOptional Manual Configuration / TV Setup Run Auto Tuning Channel SearchTV-LINK CFG FTG Mode via EBLRear Jack Panel USB-to-TTL Serial CableFTG Device Configuration Application Utilities Overview FTG Channel Map Configuration UtilityDelete UpdateFTG Channel Map Editor ADDIR Remote Access FTG Installer Menu Configuration UtilityInstaller Defaults HOSPITAL-GRADE TV onlyNEW/OPEN/SAVE FMA Configuration UtilityFMA Configuration List TV Connections Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup Checking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings 26/32/37/42LD320H & 32/37LD325H26/32/37/42LD340H & 26/32/37/42LD345H Camport Operation Stand-alone Reference TV Camport Auto Sense OperationCamport Side Video Functionality Control Camport Operation FTG or PPVReference TV Aux Input Configuration Enable001 Default Off Reference b-LAN Setup & OverviewTV Standby State TV Power On State PowerRJP Input Auto-sensing Hierarchy Priority Video Audio Reference RJP Model List and Input Auto-sensing HierarchyRJP Model List Legacy Models Scaler Models Additional FTG Mode via CPU Options Reference Resetting Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via EBL OptionsAntenna Reference LD320H/LD325H & LD340H/LD345H Rear Jack PanelAudio in RGB/DVI Game CONTROL/MPI2 Input Side Connections PanelRF Antenna & MPI Connections MONO-AUDIO-RTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Clone Programmer Clone Programmer TroubleshootingSymptom Possible Causes Possible Solutions Master and Target TVsGlossary of Terms Date Description Document Revision History / NotesDocument Revision History For Customer Support/Service, please call­
Related manuals
Manual 267 pages 53.59 Kb

26LD340H, 42LD320H, 37LD325H, 42LD340H, 32LD345H specifications

LG Electronics has established itself as a formidable name in the realm of consumer electronics, particularly in the television sector. Among its popular offerings are the models 26LD320H, 37LD345H, 32LD325H, 26LD345H, and 37LD340H. These models combine sophisticated technology with user-friendly features, catering to a diverse range of viewing preferences.

Starting with the 26LD320H, this compact LCD TV showcases a 26-inch screen, making it ideal for smaller living spaces or bedrooms. Its native resolution of 1366 x 768 pixels provides a crisp display, enhancing the viewing experience for standard-definition content and HD broadcasts. The TV features LG's Intelligent Sensor technology, which automatically adjusts picture settings based on surrounding light conditions, ensuring optimal brightness and color balance at all times.

Moving on to the 37LD345H, this model boasts a larger 37-inch display, perfect for living rooms and entertainment areas. With a resolution of 1920 x 1080 pixels, viewers can enjoy full HD content with enhanced clarity and detail. The 37LD345H is equipped with a built-in digital tuner, allowing viewers to access over-the-air HD broadcasts without the need for additional equipment. The TV also supports multiple HDMI inputs, making it easy to connect gaming consoles, Blu-ray players, and other devices.

The LG 32LD325H serves as a versatile option with its 32-inch screen, offering a balance of size and performance. This model supports both standard and high-definition content, resulting in a vivid picture quality that enchants viewers. The 32LD325H incorporates LG’s unique Picture Wizard technology, enabling users to fine-tune picture settings for their specific viewing environment.

The 26LD345H mirrors the innovative features of LG’s lineup with its stylish design and engaging 26-inch screen. It supports various input options including USB and HDMI, allowing users to connect to their favorite media devices seamlessly. Additionally, the inclusion of a robust sound system enhances the audio experience, making it a solid choice for video content and music alike.

Lastly, the 37LD340H offers an impressive 37-inch display and a similar set of features as its counterparts, appealing to those seeking a larger screen without compromising on quality. It is designed with full HD resolution and advanced sound capabilities to deliver an immersive viewing experience.

In summary, the LG Electronics series of televisions from the models 26LD320H, 37LD345H, 32LD325H, 26LD345H, to the 37LD340H, provides an array of options benefiting from modern technologies and stylish designs. They not only cater to varied room sizes and viewing needs but also ensure that consumers experience high-quality visuals and sound, aligning with LG's commitment to innovation and customer satisfaction.