LG Electronics 42LD340H Reference TV Camport Auto Sense Operation, Camport Operation Stand-alone

Page 46

Reference: TV Camport Auto Sense Operation

The Camport Auto Sense function is enabled when:

1.Installer Menu item 034 CAMPORT EN is set to 1 AND

2.Installer Menu item 040 AUTO CAMPORT is enabled (1).

Selectable: Can be accessed with INPUT key, direct access, etc.

Auto Sense: TV switches to this input when connector is inserted. The Camport (Side [AV IN 2] Video) has the highest priority and will override any commands including tuning to the Start Channel.

CAMPORT (Side Video) Functionality Control

Item 034

Item 040

Side (AV IN 2)

CAMPORT EN

AUTO CAMPORT

Video Operation

0

0

Disabled

0

1

Disabled

1

0

Selectable

1

1

Auto Sense

Camport Operation (Stand-alone)

When Camport Auto Sense is enabled as above, the TV will switch from its current source to the Side (AV IN 2) Video input whenever a plug is inserted into the AV IN 2 Video input.

When the video plug is removed, the TV will switch back to the previous source that was being displayed before the plug was inserted. However, if any direct access to an Aux channel or RF channel is requested while the Camport is active, then, when the video plug is removed, the TV will switch to the last requested channel. Source changes using any Source keys (INPUT) are ignored. Channel Up/ Down and Flashback commands are not Direct Access tuning commands, and they are also ignored.

Previous State

Operation While

State Upon

Before Inserting

CAMPORT is

Removal of

CAMPORT

Active

CAMPORT

Aux or RF

None

Previous Aux

Channel

or RF Channel

 

Aux or RF

Direct Access

Last Requested

Channel

Aux or RF Channel

 

Aux or RF

Ch Up/Down,

Previous Aux

Flashback, and

Channel

or RF Channel

Input Keys

 

 

Camport Operation (FTG or PPV)

The operation will be similar to that of the Pass-through Mode. However, when the Channel Map is maintained external to the PTC (i.e., FTG and PPV), Channel Up/ Down or Flashback keys are sent as Direct Access tuning commands to the PTC/TV.

Previous State

Operation While

State Upon

Before Inserting

CAMPORT is

Removal of

CAMPORT

Active

CAMPORT

Aux or RF

None

Previous Aux

Channel

or RF Channel

 

Aux or RF

Direct Access

Last Requested

Channel

Aux or RF Channel

 

Aux or RF

Ch Up/Down,

Last Requested Aux

Flashback, and

Channel

or RF Channel

Input Keys

 

 

46

206-4186

Image 46
Contents 206-4186 Rev B Copyright 2011, LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Setup Checklist Commercial Mode OverviewPass-through Mode External MPI Control FTG ModeRemote Management in FTG Mode CloningProCentric TV Interactive Menu Features ProCentric OperationProCentric Setup Mute Installer Remote Control Typical Key FunctionsVOL MenuBefore You Begin Master TV SetupClonable TV Setup Menu Features Cloning MethodsSet Installer Menu items Master TV Setup ProcedureSet up TV features Run Auto Tuning ChannelVerify the TV setup Lock the channel lineupUsing the Installer Menu Installer MenuAccessing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 073 through CH not AvbleInstaller Sequence Detailed Descriptions of Installer Menu ItemsMute Disable Caption Lock Sleep TimerFeature Level Poll RateChksm Error Checksum Error DIS. CH-TIME Disable Channel-TimeEN. CH-T COL. Enable Channel-Time Custom Color Rear RGB EN. Rear RGB EnableProcentric Atsc Tune ModePower Savings Back LightingChannel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningLearn Setup from Master TV USB Cloning ProcedureUSB Cloning Notes Teach Master TV Setup to Target TV TLL-1100A Clone Programmer Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerFrom previous FTG Mode via CPU FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via EBLTV Setup Menus Determining the TV Operating ModeFunction Menu FTG Mode via CPU Teaching FMA Configuration to a TV Learning an FMA Configuration File from a TV Learn From TV FMAOptional Manual Configuration / TV Setup Run Auto Tuning Channel SearchTV-LINK CFG FTG Mode via EBLRear Jack Panel USB-to-TTL Serial CableFTG Device Configuration Application Utilities Overview FTG Channel Map Configuration UtilityDelete UpdateFTG Channel Map Editor ADDIR Remote Access FTG Installer Menu Configuration UtilityInstaller Defaults HOSPITAL-GRADE TV onlyFMA Configuration List FMA Configuration UtilityNEW/OPEN/SAVE Remote Jack Pack Setup Remote Jack Pack / TV Connections & SetupTV Connections Checking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings 26/32/37/42LD320H & 32/37LD325H26/32/37/42LD340H & 26/32/37/42LD345H Camport Operation Stand-alone Reference TV Camport Auto Sense OperationCamport Side Video Functionality Control Camport Operation FTG or PPVReference TV Aux Input Configuration Enable001 Default Off Reference b-LAN Setup & OverviewTV Standby State TV Power On State PowerRJP Model List Legacy Models Scaler Models Reference RJP Model List and Input Auto-sensing HierarchyRJP Input Auto-sensing Hierarchy Priority Video Audio Additional FTG Mode via CPU Options Reference Resetting Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via EBL OptionsAntenna Reference LD320H/LD325H & LD340H/LD345H Rear Jack PanelAudio in RGB/DVI Game CONTROL/MPI2 Input Side Connections PanelRF Antenna & MPI Connections MONO-AUDIO-RTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckFTG Operation Troubleshooting Commercial Mode Check / FTG Operation TroubleshootingSymptom Possible Causes Solutions Clone Programmer Clone Programmer TroubleshootingSymptom Possible Causes Possible Solutions Master and Target TVsGlossary of Terms Document Revision History Document Revision History / NotesDate Description For Customer Support/Service, please call­
Related manuals
Manual 267 pages 53.59 Kb

26LD340H, 42LD320H, 37LD325H, 42LD340H, 32LD345H specifications

LG Electronics has established itself as a formidable name in the realm of consumer electronics, particularly in the television sector. Among its popular offerings are the models 26LD320H, 37LD345H, 32LD325H, 26LD345H, and 37LD340H. These models combine sophisticated technology with user-friendly features, catering to a diverse range of viewing preferences.

Starting with the 26LD320H, this compact LCD TV showcases a 26-inch screen, making it ideal for smaller living spaces or bedrooms. Its native resolution of 1366 x 768 pixels provides a crisp display, enhancing the viewing experience for standard-definition content and HD broadcasts. The TV features LG's Intelligent Sensor technology, which automatically adjusts picture settings based on surrounding light conditions, ensuring optimal brightness and color balance at all times.

Moving on to the 37LD345H, this model boasts a larger 37-inch display, perfect for living rooms and entertainment areas. With a resolution of 1920 x 1080 pixels, viewers can enjoy full HD content with enhanced clarity and detail. The 37LD345H is equipped with a built-in digital tuner, allowing viewers to access over-the-air HD broadcasts without the need for additional equipment. The TV also supports multiple HDMI inputs, making it easy to connect gaming consoles, Blu-ray players, and other devices.

The LG 32LD325H serves as a versatile option with its 32-inch screen, offering a balance of size and performance. This model supports both standard and high-definition content, resulting in a vivid picture quality that enchants viewers. The 32LD325H incorporates LG’s unique Picture Wizard technology, enabling users to fine-tune picture settings for their specific viewing environment.

The 26LD345H mirrors the innovative features of LG’s lineup with its stylish design and engaging 26-inch screen. It supports various input options including USB and HDMI, allowing users to connect to their favorite media devices seamlessly. Additionally, the inclusion of a robust sound system enhances the audio experience, making it a solid choice for video content and music alike.

Lastly, the 37LD340H offers an impressive 37-inch display and a similar set of features as its counterparts, appealing to those seeking a larger screen without compromising on quality. It is designed with full HD resolution and advanced sound capabilities to deliver an immersive viewing experience.

In summary, the LG Electronics series of televisions from the models 26LD320H, 37LD345H, 32LD325H, 26LD345H, to the 37LD340H, provides an array of options benefiting from modern technologies and stylish designs. They not only cater to varied room sizes and viewing needs but also ensure that consumers experience high-quality visuals and sound, aligning with LG's commitment to innovation and customer satisfaction.