LG Electronics XBV713 warranty Basic TV Connections, Optional TV Connections

Page 10

Preparation

Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, VCR, stereo system or other devices as necessary for additional connection information.

Notes:

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from each other or turn off the unit after removing the disc.

Do not connect the unit’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect the unit via another VCR. The DVD image could be distorted by the copy protec- tion system.

Basic TV Connections

Make one of the following connections, depending on the capabilities of your TV.

Rear of TV

VIDEO

AUDIO INPUT

INPUT

 

 

 

L

R

V

A1

Rear of DVD+VCR

Audio/Video connection

1.Connect the DVD/VCR VIDEO OUT jack on the unit to the video in jack on the TV using the video cable supplied (V).

2.Connect the Left and Right DVD/VCR AUDIO OUT jacks on the unit to the audio left/right in jacks on the TV using the supplied audio cables (A1).

Note:

If you use this connection, set the TV’s source selec- tor to VIDEO.

Optional TV Connections

These connections support only DVD playback. The tuner and VCR still output through the DVD/VCR OUT (A1, V) jacks.

S-Video connection

Connect the S-VIDEO OUT jack on the unit to the S-Video jack on the TV using the optional S-Video cable (S).

Component Video / Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the unit’s pro- gressive scan output for the highest possible video resolution.

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the unit to the corresponding jacks on the TV using an optional Y Pb Pr cable (C).

C

A2

S

Pr

Pb

Y

R

L

COMPONENT/PROGRESSIVE SCAN

AUDIO INPUT

 

VIDEO INPUT

 

Rear of TV

Audio connection

Connect the Left and Right AUDIO OUT jacks of the unit to the audio left/right in jacks on the TV using the supplied audio cables (A2).

Note:

If you connect both S-Video and component jack to your TV, the video may be displayed unstably on your TV. You should disconnect one of both connections to solve the problem.

10

Image 10
Contents Installation and Operating Guide Warranty V271P-M.NA1ULZENGRegulatory Information FCC Part Important Safety Instructions Contents Symbol Used in this Manual About the Symbol DisplayMoisture Condensation Types of Playable Discs Regional CodeFront Panel About the Remote Control Remote ControlPAUSE/STEP Rear Panel DVD Exclusive OUTBasic TV Connections Optional TV ConnectionsConnection to an Amplifier Accessory Audio/Video A/V Connections to unitDigital Multi-channel sound Initial Settings VCR General OperationProgram Priority Checking or Erasing the Timer ProgramAudio Mode Function OSDDisplaying Disc Information on-screen Initial Settings DVDGeneral Operation Disc Audio / Subtitle / Menu Display ModeMenu Language TV AspectSample Freq. Frequency PasswordDolby Digital / DTS / Mpeg Dynamic Range Control DRCArea Code E. Black Level ExpansionVCR Tape Playback VCR Tape Recording External Timer RecordingBasic Instructions Checking the Recording Time Instant Timer RecordingRecording from External Components Extending the Recording TimeCopying from DVD to VCR On-Screen Display VCRVCR Auto Play System Additional VCR InformationVHS Quasi Playback Sqpb General features Buttons Operations DiscsAdditional features Programmed Playback Playing an Audio CD or MP3/WMA fileID3 TAG Viewing a Jpeg file Maintenance and Service Playing a DVD VR format DiscReference Troubleshooting Symptom Cause CorrectionRemote Control Specifications For Warranty Service Warranty PeriodHOW Service is Handled Customer INTER-ACTIVE Center Numbers