Displaying Disc Information on-screen
You can display various information about the disc loaded
1.Press DISPLAY to show various playback information.
The displayed items differ depending on the disc type or playing status.
2.You can select an item by pressing v / V and change or select the setting by pressing b / B.
•Title (Track) – Current title (or track). number/total number of titles (or tracks).
•Chapter – Current chapter number/total num- ber of chapters.
•Time – Elapsed playing time.
•Audio – Selected audio language or channel.
•Subtitle – Selected subtitle.
•Angle – Selected angle/total number of angles.
Note:
If no button is pressed for a few seconds, the on- screen display disappears.
Initial Settings - DVD
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 14 to 17.
To display and exit the Menu:
Press SETUP/MENU to display the menu. A second press of SETUP/MENU will take you back to initial screen.
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
General Operation
1. Press SETUP/MENU. The Setup menu appears.
LANGUAGE
Menu Language | English |
Disc Audio | Original |
Disc Subtitle | Original |
Disc Menu | Original |
Move 
Select
2.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).
3.Use v / V to select the second desired option then press B to move to the third level.
4.Use v / V to select the desired setting then press ENTER (OK) to confirm your selection. Some items require additional steps.
5.Press SETUP/MENU or H (PLAY) to exit the Setup menu.
14